Results 1 to 3 of 3
-
06-01-2007, 12:26 AM #1
- Join Date
- Apr 2007
- Posts
- 27
Speed Sensor Positioning on 94 SLT750
OK so I am getting the speedo to work on my 94 SLT750, I reglued with CA and silicone the speed nipple back onto the MFD and I got a new sensor that goes under the grate, one question, does the hole in the sensor face the front or rear of the ski, it would seem the water pressure going into the tube would indicate speed better than vaccum created with it facing the other way, although if the tube or nipple fails thats water being pumped into the ski, any help would be great on this small detail.
-
06-01-2007, 05:13 AM #2
-
06-01-2007, 08:48 AM #3
- Join Date
- Apr 2007
- Posts
- 27
Thanks. Thats how I did it.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Need Info on 2004 RXP Speed Sensor
By seadawg in forum 4-Tec PerformanceReplies: 11Last Post: 05-13-2014, 09:04 AM -
Is throttle Position Sensor needed on Twin piper with Franco re-mappep MPEM?
By skeletor88 in forum 2-Stroke PerformanceReplies: 8Last Post: 11-13-2012, 03:14 AM -
'94 SLT750 with a rummble at low speed?
By TNStreamy in forum Polaris Open DiscussionReplies: 2Last Post: 09-10-2009, 03:42 PM -
variable speed oil pump on 94 650?
By ujustlost in forum Polaris Open DiscussionReplies: 5Last Post: 07-04-2009, 05:18 PM -
Seadoo Speed sensor (cheap on ebay)
By wickedpony2007 in forum Sea Doo Open DiscussionReplies: 1Last Post: 09-24-2008, 09:06 PM
Well have a good used oem rectifier on the way. And I'll update when...
04 gtx can't keep 30 Amp fuse.