Results 1 to 10 of 10
  1. #1

    2006 aquatrax r12x won't go over 4700 RPM

    New ....
    wastegate solenoid
    Plugs
    Air filter
    Oil change 4.3 quarts
    ------------
    Turbo turns freely lube w crc 556
    Wastegate actuator checks out with air force and diaphragm holds with slight vacuum .
    All lines and hoses checked for pinholes, dryrot, splitting
    --------------
    Ski runs/starts perfectly but limited to 4700 rpms
    No codes

    Gentlemen what is going on here ?
    Last edited by Kevlarss; 05-27-2018 at 10:25 AM.

  2. #2
    Moderator
    I build Horsepower
    NitroShark's Avatar
    Join Date
    Jan 2006
    Location
    Greenville,SC
    Posts
    1,413
    +1
    13
    Be sure the turbo wastegate "hose restrictor" is in the correct location.



    .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	restrictor.jpg 
Views:	51 
Size:	35.6 KB 
ID:	433903  

  3. #3
    Ahhh ok thank you sir. I'll check it out when I get home and post an update. The only other suspicion I have is the oil temp sensor. I think it keeps the engine around 4700 rpm if oil is cold. That's what I read on one of the forums. Does anyone know if this is true

  4. #4
    AWA MEMBER
    Join Date
    Jan 2008
    Location
    Currituck, North Carolina, United States
    Posts
    4,913
    +1
    285
    It has 2 oil pressure sensors a high and a low pressure, temp is monitored through coolant temp sensor in block, i do not believe their is a IAT sensor on the machine but i may be wrong its been a few min since i owned one

  5. #5
    The pill is in the right configuration. Oil temp sensor changed. Still no change 4700 rpm max

  6. #6
    Moderator
    I build Horsepower
    NitroShark's Avatar
    Join Date
    Jan 2006
    Location
    Greenville,SC
    Posts
    1,413
    +1
    13
    Put a boost gauge on and take a reading at 4700 RPM and report back.

  7. #7

  8. #8
    Did you ever figure out your issue. I am going thru the same thing with my 2007 F12X. No codes, runs perfect to about 4,800 rpms. Took off my line that feeds the T from the WGS and could not blow thru at idle or off. New WGS, plugs, air filter, oil correct, no codes, restrictor pill correct. Hoping you figured it out. Hoping it is not a bad ecm not providing power to WGS.
    Tom

  9. #9
    No tom.... have you

  10. #10
    Take your wastegate actuator off, and check to see if your wastegate arm moves freely inside the turbo. Ive seen this happen to where they get stuck (even with frequent riding).


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2000 Polaris Genesis FFI won't go over 4000 rpm
    By Rick240 in forum Polaris PWC Performance
    Replies: 13
    Last Post: 12-06-2012, 03:40 PM
  2. 97 900 ZXI won't go over 5000 RPMs
    By uwbadgers in forum Kawasaki PWC Performance (2-stroke)
    Replies: 0
    Last Post: 06-25-2010, 04:26 PM
  3. 97 GTX won't go over 6000 RPM
    By dachrist in forum 2-Stroke Performance
    Replies: 14
    Last Post: 09-08-2009, 05:24 PM
  4. Polaris Genesis won't go over 5000 rpms...
    By thedoc in forum Polaris PWC Performance
    Replies: 6
    Last Post: 06-20-2008, 09:55 AM
  5. 96' Polaris SLT780 won't go over 2k RPM
    By shields_c_d in forum Polaris Open Discussion
    Replies: 6
    Last Post: 08-08-2007, 04:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •