Results 1 to 10 of 14
-
05-29-2007, 08:04 PM #1
- Join Date
- May 2007
- Posts
- 6
my 94 polaris 750 will not start!
hey guys, i am really desperate for some help. i rolled my jet ski over in the water a couple times this past weekend, now it will not start. I changed the plugs , that did not help. I crank it and when i pull the plugs out, they are wet. Any ideas? HELP!!!
-
05-29-2007, 08:24 PM #2
You need to start with the basics. Check compression, check for spark, and squirt some fuel mix in the carbs and see what happens.
-
05-29-2007, 11:26 PM #3
- Join Date
- Oct 2006
- Location
- Cleveland OH
- Posts
- 18,382
- +1
- 102
Welcome Ducati. Open the elec box and see if any water got into it, after you check for spark of course.
-
05-30-2007, 12:46 AM #4
Hi ducati, WELCOME to the Green hulk Forums!!
Work quick, water is your cranks enemy. Do you still have or do you know if you have water inside the engine?
-
05-30-2007, 04:15 AM #5
Also check pulse line and fuel pump. You may have damaged the pump diaphrams.
When you say plugs are wet, are you talking fuel or water?
.
-
05-30-2007, 06:46 AM #6
- Join Date
- May 2007
- Posts
- 6
i think it has water in the engine?
i t has spark because i can pull the plugs out and they will arc. but there is a foamy looking mix that will come out of the plug hole when i crank it without the plug in . HOW DO I GET THE WATER OUT ? DO I PULL THE ENGINE ?
-
05-30-2007, 08:32 AM #7
There are drain bolts under the exhaust down low one for each cylinder.
-
05-30-2007, 08:36 AM #8
Turn OFF the fuel or pinch the fuel supply line. Turn the craft on its side (read the decals for proper direction) and crank until you have no water exiting the cylinder. See if it starts then.
How much water exited the cylinders when you originally cranked the engine after the roll overs?
Was it running and just die?
Did you have a rollover and then it wouldn't start? A little more info there please.
Did the hull have a lot of water in it, after the roll overs?
-
05-30-2007, 08:38 AM #9
Ooooh, I like beers idea about removing the drain plugs, I never get the chance to do that because we're usually down the river when somebody fills a ski with water.
-
05-31-2007, 10:29 AM #10
- Join Date
- May 2007
- Posts
- 6
there was quite a bit of water exiting the cylinders, it is mixed water fuel and oil.
No it died when it was flipped the last time, i guess everytime it kept getting more and more water in the hull.yes it was really full of water . i will definetely try everyones ideas tonite
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
1995 Polaris SL 750 will not start ( I just bought it)
By wheelers4life in forum Polaris Open DiscussionReplies: 17Last Post: 07-29-2013, 07:37 PM -
A Rookie Here, I Replaced Piston Rings On My Polaris And Will Not Start.....
By g35flyingcp in forum Polaris How To & FAQsReplies: 17Last Post: 06-08-2011, 02:50 PM -
96 Polaris SL700 will not start
By P_olaris in forum Polaris Open DiscussionReplies: 3Last Post: 09-13-2009, 09:33 AM -
1999 Polaris SLTH will not start when warm
By igeoff in forum Polaris How To & FAQsReplies: 4Last Post: 09-08-2008, 10:42 AM -
94 SLT 750 will not start - need help!!!!!
By aleal in forum Polaris How To & FAQsReplies: 8Last Post: 05-24-2008, 08:52 PM
would your intercooler pisser still flow good if the intercooler was...
SVHO Overheating