Results 1 to 7 of 7
  1. #1

    2018 SVHO pro engine cooling

    Hi I have purchased the Riva Racing Pro Series SVHO Engine Cooling Upgrade Kit. I finished the install but noticed I didn't connect anything to the right water outlet hoses, I have 2 hoses just hanging there. Looking at the water map the right water outlet is not even showing there. The OEM had the outlet of the intercooler going to them now the instructions says to connect it to the oil cooler. So now what happens to the 2 hoses on the right outlet?

  2. #2

    Join Date
    Feb 2017
    Location
    Orlando, Fl.
    Posts
    85
    +1
    12
    They are capped off so water does not come into hull and no longer used. If you installed the Riva Power Cooler, it came with two caps. See page 12 on the install sheet for the Riva Power Cooler.

  3. +1 by:


  4. #3
    Quote Originally Posted by Kaizen View Post
    They are capped off so water does not come into hull and no longer used. If you installed the Riva Power Cooler, it came with two caps. See page 12 on the install sheet for the Riva Power Cooler.

    Thanks Kaizen, I have the Fizzle Intercooler. Maybe that is why I didn't get any information on capping it.

  5. #4
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,791
    +1
    935
    Quote Originally Posted by don ching View Post
    Thanks Kaizen, I have the Fizzle Intercooler. Maybe that is why I didn't get any information on capping it.
    Yes, that's correct. The cooling routing I recommend and the cooling kit I sell do not require capping those lines.

  6. #5
    @Fizzle
    So what is difference between the riva Pro series Cooling and your routing when using your cooler ?


  7. #6
    mittens's Avatar
    Join Date
    Mar 2018
    Location
    Huntsville, AL
    Posts
    614
    +1
    60
    My fizzle has its own line, and then after the fizzle it Ys and pisses out both factory pissers.

    The factory intercooler line, feeds a anode for more cooling.

  8. #7

    Join Date
    Jul 2014
    Location
    Canyon Lake, TX
    Posts
    573
    +1
    72
    Quote Originally Posted by mittens View Post
    My fizzle has its own line, and then after the fizzle it Ys and pisses out both factory pissers.

    The factory intercooler line, feeds a anode for more cooling.
    That's how I did mine with the cheaper worx cooling kit.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Riva engine cooling upgrade kit svho fzr
    By Hockey27925 in forum Yamaha PWC Performance (4-stroke)
    Replies: 3
    Last Post: 08-24-2017, 09:21 PM
  2. Riva Vs R&D engine cooling kit for svho
    By nahe888 in forum Yamaha PWC Performance (4-stroke)
    Replies: 8
    Last Post: 11-08-2015, 07:10 AM
  3. 97' pro 785 cooling
    By havasu977 in forum Polaris PWC Performance
    Replies: 9
    Last Post: 08-07-2008, 10:21 PM
  4. I need a gasket/Oring set for a Pro Design Cool Head
    By cleetus in forum Kawasaki PWC Performance (2-stroke)
    Replies: 0
    Last Post: 06-18-2008, 05:42 PM
  5. water bypass flow and engine cooling/ecm
    By spaulding in forum Kawasaki PWC Performance (4-stroke)
    Replies: 0
    Last Post: 06-27-2007, 12:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •