looking for a couple of mods

[brad2510]

I am trying to track down 2 different mods. I remember seeing a ram air intake that was placed up in the front storage compartment. Second I am also wondering about a PPG Power piper. If you guys have any info such performance with thes parts let me know. Input will be appreciated.

[rxpblast]

the ram air to the front storgae compartment can be done a couple of ways. one way is to buy the riva intake kit and then extend the hose up to the front stoage compartment with a filter on it. another way is to do it urself like many of the guys on here have, and just order some hose that will reach from the SC to the front comapartment (cheaper way to do it). the hose is industrial hose with a smooth inside so that the air will flow smoother.

[rxpblast]

if u go into the search area, just type in air intake and scan thoruigh it. there are many posts about this topic.

[Green Hulk]

Brad, if you are looking to install a power flow/power pipe type of exhaust i have them here:

http://www.4-tecperformance.com/inde...dex&cPath=18_3

[brad2510]

Jerry tell me if I am wrong. Didnt you have a hood mounted type of ram air intake in place of your glove box at one time. if so wondering were I could get one, or even if your interesed in selling, if you still have it?

If so is there any draw backs to this type of system?

The power exaust that you have, running a stock ski like mine do you suggest bypassing the resanator or leaving it alone.

[Green Hulk]

Brad, i honestly don't recommend it. The possibility of water ingestion is too great.

The best option is to remove the front seat vent tube and either extend off of the Riva air intake up into that space (under gove box), or run your own hose from the SC into that space. You get plenty of cool air in that area.