welp..i did it!

[mxl16]

after a lot of thinking i gave glenn @ skat trak a call and sent out my venturi. ive been debating for a while on whether or not to spend the money on it. i came to the conclusion that since i ride in all kinds of weather it would be a good mod to just dial in my rpms. and if i gain some speed, which i hope i do, than thats a bonus. glenn also mentioned they have a steering nozzle mod, its basically the venturi mod but on the steering nozzle, and they give you 2 or 3 different sized exit rings. it sounds a bit overkill to me.....but what do i know. hopefully ill get it dialed in and achieve some good gains.

[Pale Rider]

mxl16: cool, mine is on it`s way there to for the triple bearing mod, stainless wear ring and a 3 blade skat prop! 80,81,82mm rings also...
we can compare notes over the summer...PR...

[terryt]

Mine's there also, and hopefully to be done in the next week or so, even though the ECU is in Canada/Germany. I ordered 81, 81.5 and 82 rings, so it will be fun to compare. I hear 81 is the ticket. Terry

[mxl16]

sounds good guys..i got 81, 82, and 83mm. i thought they just did the rings in 1mm increments interesting

[terryt]

Skat just started offering the rings in half sizes. I heard 81 or 82 are the hot sizes, so I want to try the 1/2 size. Terry

[rxpstan]

Let us know how the 3 blade works with stock drive shaft.
Hear weird harmonics with stock pump.

[Pale Rider]

there is several dudes here running the 3 blades in the GTX SC. Don`t forget I`m doing the triple bearing mod which stabilizes the shaft deflections way better..PR...

Prop should be balanced...

[WildBill9000]

Any updates about your venturi?

[mxl16]

they just received it today so itll be a couple weeks before i get it back. it should be worth the money though?

[WildBill9000]

wow a couple of weeks?? That sucks!