Results 1 to 3 of 3
  1. #1

    Conversion closed loop water pressure

    Withe the conversion closed looped set up what sort of water pressure should I be aiming for in the cooling circuit. I.e what is the max pressure I should allow build up before adding more bleed offs
    Hope this makes since

  2. #2
    Steve-m31164's Avatar
    Join Date
    Jan 2013
    Melbourne Australia
    I didnt use mine but the 20 plate heat exchangers are very efficient. If you run a 3/8 hose to it that should keep the pressure down . You are using 3 water inputs from pump ?

  3. #3
    Yes the kawi pump has 3 inputs.
    I have one to the heat x and out
    Other 2 go to a T and out to IC . From IC to exhaust mani

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. conversion closed loop
    By elbondspwc in forum Conversion PWC Performance Skis
    Replies: 8
    Last Post: 08-29-2014, 03:00 AM
  2. Closed loop cooling water routing
    By o uncola o in forum Conversion FAQ and Tips
    Replies: 4
    Last Post: 08-20-2014, 02:37 PM
  3. question about oil seals on closed loop water pump
    By Sam@Coastal in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-11-2008, 05:24 PM
  4. Water Pressure in open loop system
    By Green Hulk in forum 4-Tec Performance
    Replies: 9
    Last Post: 03-19-2006, 08:34 PM
  5. Hulk, Flushing Closed-Loop cooling system
    By Red Devil in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-12-2005, 09:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts