Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24
  1. #1
    Impulses's Avatar
    Join Date
    Dec 2011
    Location
    europe
    Posts
    869
    +1
    28

    Skat Trak for RXP 300

    It is scary to install Solas because many impellers have folded and it is to play with chance.


    He wants to know what impeller pitch he would need for his Vtech 8,450 rpm configuration.


    Thanks guys


  2. #2
    marcroberts's Avatar
    Join Date
    Jul 2015
    Location
    Pomona Kansas
    Posts
    119
    +1
    23
    He needs to get 15/17 that will have him close I assume it has tune/air/intake upgrade then this will be pretty close may have to fine tune just a little

  3. #3
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,759
    +1
    2,706
    Quote Originally Posted by Impulses View Post
    It is scary to install Solas because many impellers have folded and it is to play with chance.


    He wants to know what impeller pitch he would need for his Vtech 8,450 rpm configuration.


    Thanks guys
    Many guys go with either the 14/20 or 15/17 pitch Skat Trak


    Skat 3 blade 161mm impellers for Seadoo 300 - Choose your pitch

    These impellers are made exclusively for the Sea Doo 300 HP watercraft and are available in various pitch sizes of which you can choose below....
    Skat 300X Impeller $349.95

    ... more info

  4. #4
    mrsprinkles's Avatar
    Join Date
    Apr 2016
    Location
    Binghamton, NY
    Posts
    295
    +1
    20
    Im curious if a Skat would be good for me. I have the stock impeller set to 13/16.5 and im turning 8550 RPMS with a top speed of 82 GPS 83-84 dash. The tune i was using was the stage 3 8800 VT11, jesus sent me a stage 8950 101 Agr tune with 2 deg more aggressive timing in midrange and WOT, but was curious what results everyone had with a similar setup as me.

    My setup
    2016 RXP-X 300
    Riva Power Filter
    Catch Can
    Stock impeller pitched to 13/16.5
    Flywheel Bolts
    Valve Retainers
    V-Tech 1100CC Injectors
    135 XX Charger wheel
    Riva Intercooler Tubing
    IMUK
    Rideplate holes filled
    Pump fuel is usually non-ethanol 91

  5. #5
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,370
    +1
    867
    Quote Originally Posted by mrsprinkles View Post
    Im curious if a Skat would be good for me. I have the stock impeller set to 13/16.5 and im turning 8550 RPMS with a top speed of 82 GPS 83-84 dash. The tune i was using was the stage 3 8800 VT11, jesus sent me a stage 8950 101 Agr tune with 2 deg more aggressive timing in midrange and WOT, but was curious what results everyone had with a similar setup as me.

    My setup
    2016 RXP-X 300
    Riva Power Filter
    Catch Can
    Stock impeller pitched to 13/16.5
    Flywheel Bolts
    Valve Retainers
    V-Tech 1100CC Injectors
    135 XX Charger wheel
    Riva Intercooler Tubing
    IMUK
    Rideplate holes filled
    Pump fuel is usually non-ethanol 91

    I just got done testing my Solas 4blade 161 that I had Dave make me and I can say it hauls ass. I have a 135XX also, but am running Motec tuned by Evan. It is faster than 82 for sure. It has run 87 before, but can it do it again? NOT sure as it was a crazy day. SOme say it was a GPS spike. I will say this is runs 84 with my fast ass on GPS for sure. I am not sure I can duplicate the 87 but I hope so.

    also it is a 15-22R

    How bad is your shutter with your 135XX? is it annoying?

  6. #6
    mrsprinkles's Avatar
    Join Date
    Apr 2016
    Location
    Binghamton, NY
    Posts
    295
    +1
    20
    Quote Originally Posted by Water4fire View Post
    I just got done testing my Solas 4blade 161 that I had Dave make me and I can say it hauls ass. I have a 135XX also, but am running Motec tuned by Evan. It is faster than 82 for sure. It has run 87 before, but can it do it again? NOT sure as it was a crazy day. SOme say it was a GPS spike. I will say this is runs 84 with my fast ass on GPS for sure. I am not sure I can duplicate the 87 but I hope so.

    also it is a 15-22R

    How bad is your shutter with your 135XX? is it annoying?
    I was only able to run it for an 1.5 hours yesterday. I didn't notice any shutter?

    Wonder why mine needed to be pitched to 16.5 for any speed when you are at 22 on the tail.

  7. #7
    stage2pc's Avatar
    Join Date
    May 2015
    Location
    DOWN HERE
    Posts
    81
    +1
    11
    Quote Originally Posted by Water4fire View Post
    I just got done testing my Solas 4blade 161 that I had Dave make me and I can say it hauls ass. I have a 135XX also, but am running Motec tuned by Evan. It is faster than 82 for sure. It has run 87 before, but can it do it again? NOT sure as it was a crazy day. SOme say it was a GPS spike. I will say this is runs 84 with my fast ass on GPS for sure. I am not sure I can duplicate the 87 but I hope so.

    also it is a 15-22R

    How bad is your shutter with your 135XX? is it annoying?
    What rpm are you having this shutter issue?

  8. #8
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,370
    +1
    867
    Quote Originally Posted by stage2pc View Post
    What rpm are you having this shutter issue?
    6700RPM's . It annoys me. BUT the dam thing is fast as hell.

  9. #9
    quiddo15's Avatar
    Join Date
    Aug 2012
    Location
    Sydney Australia
    Posts
    757
    +1
    111
    Quote Originally Posted by mrsprinkles View Post
    I was only able to run it for an 1.5 hours yesterday. I didn't notice any shutter?

    Wonder why mine needed to be pitched to 16.5 for any speed when you are at 22 on the tail.
    Bare in mind you can't compare pitch on two different impellers, waterfire has a 159mm Srz 15-22 that has been machined to a 161mm and you are running the stock 161mm depitched on the trailing edge.

  10. #10
    WICKEDSEADOO's Avatar
    Join Date
    Jun 2009
    Location
    SO CAL
    Posts
    1,001
    +1
    143
    Quote Originally Posted by Water4fire View Post
    I just got done testing my Solas 4blade 161 that I had Dave make me and I can say it hauls ass. I have a 135XX also, but am running Motec tuned by Evan. It is faster than 82 for sure. It has run 87 before, but can it do it again? NOT sure as it was a crazy day. SOme say it was a GPS spike. I will say this is runs 84 with my fast ass on GPS for sure. I am not sure I can duplicate the 87 but I hope so.

    also it is a 15-22R

    How bad is your shutter with your 135XX? is it annoying?
    I told you it hauls ass!

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts 80lb injectors, intake grates, skat trak prop, rxp side vents
    By WICKEDSEADOO in forum Sea Doo Classifieds
    Replies: 6
    Last Post: 07-07-2013, 05:39 PM
  2. Replies: 1
    Last Post: 03-28-2013, 02:30 AM
  3. URGENT, need some Pump parts of SKAT-TRAK for RXP !!!
    By BOUDHA in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 02-23-2010, 07:51 AM
  4. URGENT, need some Pump parts of SKAT-TRAK for RXP !!!
    By BOUDHA in forum 4-Tec Performance
    Replies: 0
    Last Post: 02-23-2010, 07:51 AM
  5. Which skat trak for X
    By brendus in forum 4-Tec Performance
    Replies: 17
    Last Post: 10-30-2008, 05:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •