Results 1 to 2 of 2
  1. #1

    Join Date
    May 2007
    Location
    New Port Richey, FL
    Posts
    23

    Questions regarding differences in pump

    Hey guys. I have an 03 GTX SC. It has the plastic pump which has seen better days. I picked up an aluminum pump which I believe is from a later year RXP or RXT. It came with an aluminum wear ring and prop.

    I am pretty the RXP/T had a larger diameter prop with a larger driveshaft.

    Just want to be sure everything else is the same and will work if I swap over my prop/wear ring from my 185hp pump.

    Thanks!


  2. #2
    As long as the aluminum pump is from an 04-08 RXP/RXT it will work great, just change the impeller, wear ring and replace the front oil seal on the pump. I'd also use a new reducer, the two o-rings at the cone, new grease and neo pump seal when installing back on. You should also use smaller diameter flat washers and using the newer bronze lock nuts is good practice too.

  3. +1 by:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Question regarding Play in Steering Column - 2007 RXT
    By bankerii in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 03-14-2011, 03:03 PM
  2. 2003 GTX SC question regarding the water pump
    By Jean-Paul in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 03-18-2010, 07:21 AM
  3. Replies: 7
    Last Post: 05-21-2009, 08:02 PM
  4. question on difference in engine internals
    By 8 is enough in forum 4-Tec Performance
    Replies: 0
    Last Post: 12-07-2008, 08:32 PM
  5. GP1200R question about differences in year of manufacture
    By alias3r in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 04-08-2008, 06:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •