Bosch Replacement Throttle Body

[rsgarm]

did you buy it from advance auto with bosch part #280 750 009 ?

I'm pleased to report the Bosch TB (part #0280 750 009) that I purchased for $135 from RockAuto.com works perfectly on my 2013 RXP-X. It is not quite a "plug & play" replacement for the $800 Sea Doo OEM TB (part # 420892592), because you can't use the original Sea Doo gasket and mounting bolts. I purchased a MAHLE rubber coated metal gasket (part number G31613) and four M6 x 50mm stainless steel bolts, and the Bosch TB bolted right up and installed easily. However, as others have mentioned, it was then necessary to have my mechanic use the BUDS system to reset the "0 degree throttle position". He charged me $20 to reset the throttle postion to "0", and presto the ski runs perfectley!

[krouchchocolate]

I'm pleased to report the Bosch TB (part #0280 750 009) that I purchased for $135 from RockAuto.com works perfectly on my 2013 RXP-X. It is not quite a "plug & play" replacement for the $800 Sea Doo OEM TB (part # 420892592), because you can't use the original Sea Doo gasket and mounting bolts. I purchased a MAHLE rubber coated metal gasket (part number G31613) and four M6 x 50mm stainless steel bolts, and the Bosch TB bolted right up and installed easily. However, as others have mentioned, it was then necessary to have my mechanic use the BUDS system to reset the "0 degree throttle position". He charged me $20 to reset the throttle postion to "0", and presto the ski runs perfectley!

Ah I guess I was lucky then. I didn’t have to reset my Tpms. I used the original gasket and just cut off the tabs

[KRHynes17]

Mine is doing similar. 12 PX, starts up with check engine light. Fault 1620. High rpms 2500 or so just idling. I ordered that Bosch throttle body just now. Sad thing is I just put $1605 on the ibr, today would of been the first time out in a month while it was getting fixed, now this.

[Hurban96]

I'm pleased to report the Bosch TB (part #0280 750 009) that I purchased for $135 from RockAuto.com works perfectly on my 2013 RXP-X. It is not quite a "plug & play" replacement for the $800 Sea Doo OEM TB (part # 420892592), because you can't use the original Sea Doo gasket and mounting bolts. I purchased a MAHLE rubber coated metal gasket (part number G31613) and four M6 x 50mm stainless steel bolts, and the Bosch TB bolted right up and installed easily. However, as others have mentioned, it was then necessary to have my mechanic use the BUDS system to reset the "0 degree throttle position". He charged me $20 to reset the throttle postion to "0", and presto the ski runs perfectley!

I have a 09 gtx 255 that was throwing a map sensor code p0106. New map sensor installed and still had the code pop up and went into limp mode. I installed the bosch 0280750009 throttle body and mahle gasket and the problem went away. Got both off of amazon for $149.

[ou812]

Ah I guess I was lucky then. I didn’t have to reset my Tpms. I used the original gasket and just cut off the tabs

BooYa!!!

[Sharkdiver1125]

I have a 20 hour oem throttle body off a 2017 rxt that will fit yours for $350 shipped if you want it instead of gambling with knockoffs

[synergyracing]

deleted

[fartanas]

Need to say that BOSCH 0280 750 009 doesn't work on RXT-X 2010 even after resetting the TPS with candoopro.

[m4f1050]

On newer skis (300 to be exact) has anybody tried to use a 0280750152 (68mm) does it use the same plug?

[markusvt]

Worked perfect on 2012 RXTX.