Results 1 to 3 of 3
  1. #1

    Join Date
    Oct 2013
    Location
    denair ca.
    Posts
    19

    seperating top and bottom hulls

    I have a nos 2012 15f ski and I need to pull the motor out without removing intake or exhaust can I just pull the rub rail and drill out the rivets and cut the glue to split the halves


  2. #2

    Join Date
    May 2008
    Location
    Sweetwater
    Posts
    975
    +1
    159
    No, that epoxy is crazy strong... And to be honest all that work you are giving yourself is a lot more then just removing some bolts for the manifolds. Don't forget you'd have to remove all the cables and steering, would be such a pain..

  3. #3
    Let me out of here......I need to go on Greenhulk!
    Join Date
    Jun 2008
    Posts
    405
    +1
    11
    Quote Originally Posted by Rescue1 View Post
    No, that epoxy is crazy strong... And to be honest all that work you are giving yourself is a lot more then just removing some bolts for the manifolds. Don't forget you'd have to remove all the cables and steering, would be such a pain..
    Not to mention that you cant really cut the glue from the outside of the hull because of the lip on the top deck,it hangs down. You would have to cut it from the inside of the hull which is even more difficult with the motor in it. Wondering why you "need" to pull motor with manifolds on ? If the hull is trash you can just sawzall the top off right above the bumpers.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mixing and Matching top and bottom half of blocks
    By Pyro in forum 4-Tec Performance
    Replies: 1
    Last Post: 05-31-2013, 09:27 AM
  2. Mismatch case tops and bottoms (y or n)
    By ctct2118 in forum Yamaha Open Discussion
    Replies: 2
    Last Post: 08-16-2009, 04:04 PM
  3. 750sx fresh top and bottom w/ pipe 1000.00
    By chopper901 in forum Kawasaki Skis
    Replies: 1
    Last Post: 11-18-2008, 06:49 PM
  4. Splitting top and bottom deck
    By 74mjh in forum 4-Tec Performance
    Replies: 1
    Last Post: 07-26-2008, 06:25 AM
  5. GP1200 can u mix top and bottom case from different 1200s
    By yacser1 in forum Yamaha Open Discussion
    Replies: 1
    Last Post: 03-10-2008, 09:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •