2010 rxtx 260 with code p106 map code replaced map sensor 2 times. Checked 3 wires from the sensor plug to ecm with a meter,all test good.i have the 5 volt reference at the map plug,the other 2 have no resistance.removed the intake found this model has a flame arrester built into the manifold looks clean and dry.checked the air temp sensor which is good.was at a seadoo dealer for 3 weeks for this code they gave up on it. Got 100psi compression starts right up no smoke no blow by just wont idle and gas fouls the plugs.fuel pressure is 58 psi i am going to try a different intake tommarrow any help would be great where do these 4 tec intakes break or crack at???? Thanks