Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: I can't Pee!!!

  1. #1

    I can't Pee!!!

    So I have a 02 xlt 800 and the pee stream doesn't work.it bubbles alittle.

    I blew compressed air threw it and it sounds clear.


    Ski is new to me so it never worked for me

    Am I missing something? Besides a doc.


  2. #2
    mudslanger's Avatar
    Join Date
    Jul 2010
    Location
    Huntsville Al
    Posts
    1,343
    +1
    54
    You need to pull the line off from inside the hull and blow it out with compressed air. Unless you've already tried it that way. If your blowing it from the outside the debris is just floating in the bigger line then when you ride it stops up the smaller outlet

  3. #3
    stream doesnt work on hose on the trailer or when your running on the water......Big difference.m On the trailer its becuse you dont have enough hose pressure. its no bug deal, if coming out the exhaust. If running on the water then thats a different story

  4. #4
    To specify the yamaha trade mark pee from the rear deck . Not the front coolant pee hole .

    Sorry for confusion.

  5. #5
    mudslanger's Avatar
    Join Date
    Jul 2010
    Location
    Huntsville Al
    Posts
    1,343
    +1
    54
    Is this the line hooked up to the top of the pump outlet. And make sure it's not kinked.

  6. #6
    Yep. ,no kinks ,blew air threw it. The pick up on that is at the end off the jet pump on those little sits correct ?

  7. #7
    mudslanger's Avatar
    Join Date
    Jul 2010
    Location
    Huntsville Al
    Posts
    1,343
    +1
    54
    Yes at the end of the jet pump on top. Make sure it's on top. Check hose good for splitting. Some people delete it anyway they don't like it spraying.

  8. #8
    Ok will pull hose off and check. thanks

    I just want everything to be correct , just that kind of guy I guess.

    Considering I bought it with a blown crank and rebuilt it from the cracked case up I'm impressed the only thing wrong is the yamaha pee stream .

    Got 4 hours on and gets stronger every time I take it out.

  9. #9
    Took it out yesterday on chop with my fat butt and hit 53mph.

    Needs alittle more grab out of the hole so a pump seal is in order.

  10. #10
    Ok. ,I checked hose for splits and found none. Weird .
    Oh and I wil call it like it's supposed to be called I guess
    Visibility spout. VS

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Can high heat and humidity take away 200 rpms?
    By Vern in forum 4-Tec Performance
    Replies: 14
    Last Post: 06-08-2005, 12:46 PM
  2. Can you use the blue hose connectors on the Power pipe also?
    By Therock in forum 4-Tec Performance
    Replies: 4
    Last Post: 06-06-2005, 02:56 PM
  3. Can I post GTX stuff too....lol
    By two2curupt in forum 4-Tec Performance
    Replies: 2
    Last Post: 05-14-2005, 10:54 PM
  4. PPG or Riva Air Intake, can't decide
    By Shibby1485 in forum 4-Tec Performance
    Replies: 11
    Last Post: 05-12-2005, 05:50 PM
  5. Hulk can you PM me the cost of paint change
    By bling bling in forum 4-Tec Performance
    Replies: 14
    Last Post: 05-03-2005, 06:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •