Honda R12X after market intercooler,FCD2

[DR2006RXP]

Just wanted to post what am gonna be putting on this honda R12X.

[DR2006RXP]

Confirmed the aftermarket intercooler is off the todo list , on to the custom free flow exhaust .

[DR2006RXP]

[DR2006RXP]

Mbc on and set to 16 psi no more surge of power, the power feels even all the way threw the rpm range to 6350

66mh on GPS

[DR2006RXP]

just found this and it could be a good solution to a piggy back to adjust MAP volatge ,ignition,afr, adding more fuel and even datta logging built it



http://www.ultimatepwc.com/shop/hond...sport-fic.html

not affiliated to them in any way just found this a few minuted ago i would love to test it and provide a review and give some feedback for future honda owners looking to purchase this item.

[DR2006RXP]

Straight pipe home maid with some help from a friend with a lathe mill done.

I used this as a reference to see how a 90* would look before I went ahead and bend a aluminum tube for the actual exhaust and I later maid a 90* with the left over rubber exhaust hose, I auction got 1 90* and a 45* out of that hose, I them used a 3 inch for the outside diameter to complete the water jacket . It ended up looking something like the last picture just with a nice shinny finish and a pipe down the middle to direct the exhaust and prevent water from running back Into the exhaust while off and prevent damage to the turbo and even hydrolock

[HONDAMAN21]

�� that last picture you posted was of my r12x ��The pipe sounds good and i havent had any problems with water coming back into the motor

[DR2006RXP]

Your post inspired me to make my own

[big_phil]

What kind of intercooler is that? Did you have to make the mounting bracket? I am looking at the macs boost one but its pricy to get to canada

[DR2006RXP]

It is a tupé 14 intercooler

https://www.ebay.com/itm/291691367583