Page 1 of 3 123 LastLast
Results 1 to 10 of 27
  1. #1
    DR2006RXP's Avatar
    Join Date
    Dec 2012
    Location
    Earth
    Posts
    3,074
    +1
    215

    Honda R12X after market intercooler,FCD2

    Just wanted to post what am gonna be putting on this honda R12X.

    Click image for larger version. 

Name:	Image1460771832.133260.jpg 
Views:	238 
Size:	82.4 KB 
ID:	385176Click image for larger version. 

Name:	Image1460771857.267488.jpg 
Views:	162 
Size:	92.3 KB 
ID:	385177Click image for larger version. 

Name:	Image1460771880.389937.jpg 
Views:	239 
Size:	87.9 KB 
ID:	385178


  2. #2
    DR2006RXP's Avatar
    Join Date
    Dec 2012
    Location
    Earth
    Posts
    3,074
    +1
    215
    Confirmed the aftermarket intercooler is off the todo list , on to the custom free flow exhaust .

  3. #3
    DR2006RXP's Avatar
    Join Date
    Dec 2012
    Location
    Earth
    Posts
    3,074
    +1
    215
    Click image for larger version. 

Name:	Image1460854581.680142.jpg 
Views:	243 
Size:	85.1 KB 
ID:	385271
    Click image for larger version. 

Name:	Image1460854608.985516.jpg 
Views:	209 
Size:	42.0 KB 
ID:	385272
    Click image for larger version. 

Name:	Image1460854641.157582.jpg 
Views:	153 
Size:	71.1 KB 
ID:	385273
    Click image for larger version. 

Name:	Image1460854664.245217.jpg 
Views:	132 
Size:	156.1 KB 
ID:	385274

  4. #4
    DR2006RXP's Avatar
    Join Date
    Dec 2012
    Location
    Earth
    Posts
    3,074
    +1
    215
    Mbc on and set to 16 psi no more surge of power, the power feels even all the way threw the rpm range to 6350

    66mh on GPS


    Click image for larger version. 

Name:	Image1461210401.222870.jpg 
Views:	123 
Size:	46.8 KB 
ID:	385682

  5. #5
    DR2006RXP's Avatar
    Join Date
    Dec 2012
    Location
    Earth
    Posts
    3,074
    +1
    215
    just found this and it could be a good solution to a piggy back to adjust MAP volatge ,ignition,afr, adding more fuel and even datta logging built it



    http://www.ultimatepwc.com/shop/hond...sport-fic.html

    not affiliated to them in any way just found this a few minuted ago i would love to test it and provide a review and give some feedback for future honda owners looking to purchase this item.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	AEM powersport FIC.JPG 
Views:	799 
Size:	77.8 KB 
ID:	386181  

  6. #6
    DR2006RXP's Avatar
    Join Date
    Dec 2012
    Location
    Earth
    Posts
    3,074
    +1
    215
    Straight pipe home maid with some help from a friend with a lathe mill done.

    I used this as a reference to see how a 90* would look before I went ahead and bend a aluminum tube for the actual exhaust and I later maid a 90* with the left over rubber exhaust hose, I auction got 1 90* and a 45* out of that hose, I them used a 3 inch for the outside diameter to complete the water jacket . It ended up looking something like the last picture just with a nice shinny finish and a pipe down the middle to direct the exhaust and prevent water from running back Into the exhaust while off and prevent damage to the turbo and even hydrolock

    Click image for larger version. 

Name:	Image1462327598.627447.jpg 
Views:	112 
Size:	56.7 KB 
ID:	387020
    Click image for larger version. 

Name:	Image1462327965.359649.jpg 
Views:	122 
Size:	44.7 KB 
ID:	387024
    Click image for larger version. 

Name:	Image1462328057.737900.jpg 
Views:	138 
Size:	72.8 KB 
ID:	387025
    Click image for larger version. 

Name:	Image1462328135.108770.jpg 
Views:	136 
Size:	66.4 KB 
ID:	387026
    Click image for larger version. 

Name:	Image1462328201.696988.jpg 
Views:	120 
Size:	42.5 KB 
ID:	387027
    Click image for larger version. 

Name:	Image1462328492.139348.jpg 
Views:	126 
Size:	125.4 KB 
ID:	387028

  7. #7
    �� that last picture you posted was of my r12x ��The pipe sounds good and i havent had any problems with water coming back into the motor

  8. #8
    DR2006RXP's Avatar
    Join Date
    Dec 2012
    Location
    Earth
    Posts
    3,074
    +1
    215
    Your post inspired me to make my own

  9. #9

    Join Date
    Sep 2014
    Location
    wasaga beach, ontario
    Posts
    25
    +1
    1
    What kind of intercooler is that? Did you have to make the mounting bracket? I am looking at the macs boost one but its pricy to get to canada

  10. #10
    DR2006RXP's Avatar
    Join Date
    Dec 2012
    Location
    Earth
    Posts
    3,074
    +1
    215
    It is a tupé 14 intercooler

    https://www.ebay.com/itm/291691367583

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 06-01-2012, 01:35 PM
  2. Water in after market intercooler
    By Rex1 in forum 4-Tec Performance
    Replies: 2
    Last Post: 11-23-2010, 09:19 PM
  3. Are you running an after market intercooler?
    By Green Hulk in forum Yamaha PWC Performance (4-stroke)
    Replies: 8
    Last Post: 04-03-2010, 03:37 PM
  4. Are you running an after market intercooler?
    By Green Hulk in forum 4-Tec Performance
    Replies: 0
    Last Post: 04-01-2010, 02:58 PM
  5. AFTER MARKET INTERCOOLER RRIC OR RIVA IC
    By JOSE13RT in forum 4-Tec Performance
    Replies: 5
    Last Post: 06-20-2006, 07:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •