Results 1 to 3 of 3
  1. #1
    aquaaddict's Avatar
    Join Date
    May 2011
    Location
    Western Australia
    Posts
    22

    Spare pin from an oil pump?

    Hi,

    Does anyone have a spare pin from an oil old pump:


    I managed to loose one whilst rebuilding the pump and they are not sold by Yamaha. Its an FX HO 6B6 engine but I suspect many others may fit, the pin is 3mm x 16mm.

    I know generic locating pins are available but I have no idea if it should be hardened or what grade of steel etc and I would worry that I used the wrong type and it may shear off during use.

    Thanks!

    Anthony
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	pin.jpg 
Views:	106 
Size:	35.5 KB 
ID:	385125  


  2. #2
    Guidoo's Avatar
    Join Date
    Jul 2011
    Location
    Living outside of Charleston SC.
    Posts
    2,349
    +1
    540
    I've fabricated a pin for hydraulic pump that produced well over 3000psi from a new drill bit. Finding the correct size is the main thing.

  3. #3
    aquaaddict's Avatar
    Join Date
    May 2011
    Location
    Western Australia
    Posts
    22
    I found an oil pump drive pin for a Yamaha bike (part 93603-2202, ordered it on the off chance and its the same diameter to within 0.02mm, its a bit longer but that should be easy to sort out on the grinder or lathe. Being a Yamaha part for a similar job in a different engine hopefully it will be up to the job and I hope that part number helps anyone else out that stumbles across this thread.

    Thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts need an oil pump 2009 2010 fzr sho motor
    By Rocketman in forum Yamaha Classifieds
    Replies: 4
    Last Post: 09-08-2014, 01:52 PM
  2. Oil leak from behind oil pump - 787
    By CZSteve in forum 2-Stroke Performance
    Replies: 0
    Last Post: 07-12-2014, 01:17 PM
  3. OK, Finally Changing from Oil Pump to Premix, Question
    By havanabama in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 01-15-2008, 01:28 AM
  4. Bleeding Air From Oil Pump
    By la90043 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 12-02-2007, 11:20 AM
  5. I need an oil pump for 2000 GP1200R
    By Robsauto2 in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 04-29-2007, 11:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •