Results 1 to 10 of 10
Thread: what tools?
-
12-15-2005, 09:33 PM #1
what tools?
what special tools will i need for installing the SC impeller and solas impeller? not the everyday tools but specific speacial ones that i prolly need to buy
-
12-15-2005, 09:42 PM #2
E8 Torx socket and 1/4" box end wrench for the supercharger.
You will also want the service mounting plate and shaft holder tool for the SC.
On the pump side you will need a 12 mm allen head socket and a impeller spline tool.
-
12-15-2005, 10:15 PM #3
-
12-15-2005, 10:38 PM #4
You can get the supercharger tools from Richard here on the forum (way2fast)
i bought my Torx socets and 12mm allen head socket at my local Autozone.
-
12-15-2005, 10:43 PM #5
-
12-16-2005, 12:16 AM #6
You can get a spanner wrench at Harbor Freight (shaft holder tool) You don't NEED a mounting plate if you are just going to replace the impeller, I didn't.
What is the impeller spline tool used for?
-
12-16-2005, 07:56 AM #7
Impeller spline tool if for the pump impeller.
-
12-22-2005, 04:53 PM #8
cam someone show me the pic of these tools on Riva's site so i can order them, i found the tools but need to make sure im getting the right ones for the rxp. i wait for Richard cuz im doing the mods this coming week after x-mas. thanks!
-
12-22-2005, 05:55 PM #9
http://www.rivayamaha.com/RivaStore/...peller%20Tools is this one of the tools needed?
-
12-22-2005, 05:57 PM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
how to paint a ski? What tools are required.
By jprochnow in forum Yamaha Open DiscussionReplies: 22Last Post: 06-21-2009, 11:30 AM -
what tools are you bringing to mudbug?
By Altezza01 in forum Mudbug Nationals PWC.Life RallyReplies: 13Last Post: 04-29-2009, 07:42 PM -
What tool to carry in Challenger?
By PilotSmith in forum 2-Stroke PerformanceReplies: 5Last Post: 01-26-2008, 11:13 AM -
What tools do I need
By cfnnslsq in forum 4-Tec PerformanceReplies: 4Last Post: 09-13-2007, 03:31 PM -
I just want to flip my wear ring what tools do I need?
By TroyRXP15 in forum Sea Doo Open DiscussionReplies: 1Last Post: 05-30-2006, 09:10 AM
Thanks for the response, it looks like I could us that bolt but the OE nut...
2021/2022 GP1800 SVHO Worx Intake...