Results 1 to 6 of 6
Thread: Fxho 160 conversion to Sho
-
08-12-2015, 03:14 AM #1
Fxho 160 conversion to Sho
Right I have fxho160 which I like the hull better than nano hull . I might have a chance to buy a fzr with smashed hull ( find out soon ) will it be an easy swap to put the Sho engine into my fxho 16" hull or will there be loads of work . I know wiring harnes will need to be swapped but will I be able to use my 160 clocks and what about the pump area
-
08-13-2015, 02:15 AM #2
Can the SHO Engine fit in THE FX HO? Sure, anything is possible. Why bother?
Last edited by Lastcat; 08-13-2015 at 02:34 AM.
-
08-13-2015, 02:21 AM #3
I had an Sho didn't like the nano hull thought it was rubbish in choppy water but speed was good on flat . If I put the Sho in fxho 160 hull surely it will be win win fast on flat and good in choppy water
-
08-13-2015, 03:44 AM #4
You will need a different drive shaft as a minimum
Other parts may or may not line up
You will have to unbolt everything and try it
-
08-13-2015, 04:12 AM #5
Or the other possibility it gpr Sho conversion but the amount of work id have to get someone else to do it for me in the UK . I've look at a few threads and it looks like a lot of work involved
-
08-13-2015, 06:26 AM #6
The motor will bolt right in!!! I did it in 2011...
You can use the same ho pump. I had the motor off a FX-SHO so the gauges fit perfectly as well.
BTW, I do agree with you on the FX-HO Hull being wayyyyyyy better....
Good luck, Julio...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
yamaha fxho 160 COMPRESSION
By billyboyno1 in forum Yamaha PWC Performance (4-stroke)Replies: 1Last Post: 02-12-2010, 07:11 PM -
FS - Skat Trak Driveshaft Seal for RXP/RXT $160 shipped to your door!!
By inteljd in forum Sea Doo ClassifiedsReplies: 3Last Post: 09-08-2009, 10:15 PM -
msx 110 conversion to 150
By alt in forum MSX/MatrixReplies: 3Last Post: 06-23-2008, 09:16 AM -
750 SLT conversion to pissers
By emilbolboaca in forum Polaris Open DiscussionReplies: 4Last Post: 05-28-2008, 10:04 PM -
06 Fxho Riva Kit To Sho?
By fussy1 in forum Yamaha PWC Performance (4-stroke)Replies: 3Last Post: 01-21-2008, 12:57 AM
Red your other post about connecting wires for the iBR, I checked the shop...
Seadoo spark stays in reverse