Results 1 to 8 of 8
-
08-06-2015, 05:32 PM #1
- Join Date
- May 2008
- Location
- Orlando
- Posts
- 24
Have a question about my speed with current mods
Have a 2012 fx sho list of mods include:
Ribbon delete
Riva intake grate
Jim's cut ride plate
Leo wedge
Fizzle Y1000 intercooler
solas 13/22r (riva) prop
Dean's re-flash
Riva cold air intake
Tommy Jordan Exhaust mod
went out for test runs current conditions were heat of the day about 3pm
water temp 92
air remp 94+
3/4 tank of gas
AFR 11.4
RPM'S 8260
Speed was 76.5 I know I'm down speed with the hot air and hot water along with all the gas
but does the numbers seem in line, also should I pitch the prop to get more rpm's
and speed or wait to do some testing when it's a little cooler
-
08-06-2015, 07:51 PM #2
Yeah its hot as hell in Tampa also. so yes you need pitch it . Send it to jim to get it right.
-
08-06-2015, 07:53 PM #3
Speed looks pretty good for those mods in my opinion. Some more RPM will help too.
-
08-06-2015, 09:12 PM #4
Have you talked to dean about what afr he wants you to run?
You're far to rich.
I alao run deans flash and im around 12.5
-
+1 by:
-
08-13-2015, 03:22 PM #5
- Join Date
- May 2008
- Location
- Orlando
- Posts
- 24
[QUOTE=Chupacobra;2608854]Have you talked to dean about what afr he wants you to run?
You're far to rich.
I alao run deans flash and im around 12.5[/QUOTE
he was there while testing afr's was 11.4-11.7 I'm wondering if the prop is pitch to 13/19 would that get the rpm's up enough to pick up a 1-2 mph and still keep the rpm's under the 8600
-
08-13-2015, 06:01 PM #6
-
08-14-2015, 04:35 PM #7
- Join Date
- May 2008
- Location
- Orlando
- Posts
- 24
with the afr 11.4-11.7 by re pitching the prop would that help to lean out to fuel any or is that only going to be done by the programming of the ecu
-
08-14-2015, 04:42 PM #8
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
i have a question about my sc.........
By johnrxp in forum 4-Tec PerformanceReplies: 2Last Post: 05-15-2011, 12:56 PM -
I have some questions about my Kawasaki Ultra 250x
By Trento in forum Kawasaki Open DiscussionReplies: 4Last Post: 06-04-2010, 07:51 AM -
I have a question about my 02 f12x
By pclynch1974 in forum Honda Open DiscussionReplies: 1Last Post: 06-12-2008, 05:58 AM -
I have a couple questions about my "new to me"ski
By pclynch1974 in forum Polaris Open DiscussionReplies: 14Last Post: 06-03-2008, 03:50 PM -
Have a question about my nuts
By The Bandit in forum 4-Tec PerformanceReplies: 8Last Post: 09-14-2006, 10:38 AM
Are you using zip ties for your line clamps?? If so, replace with Oetiker...
When I open the power valve the...