Results 1 to 5 of 5
-
08-06-2015, 02:10 PM #1
Sbt 15f engine head does not have enough fittings
Just received a rebuilt SBT 15F engine and the valve cover does not have enough fittings to hook up the hoses I have 5 lines and only one fitting on the valve cover. SBT says to block off other lines! Seems odd to me
-
08-06-2015, 05:49 PM #2
Tell SBT to FOAD or send you a new valve cover with gasket now. (Be nice and leave the FOAD part out lol. If it is an exchange you need same/same.)
-
08-06-2015, 05:50 PM #3
-
08-07-2015, 02:47 PM #4
They sent you a motor or motor with a valve cover from a newer ski, the 2009 & up don't use those extra hoses. I have blocked off those on my 2006.
-
08-13-2015, 11:03 AM #5
There is a nipple on your spark arrest/air box where these 2 hoses connect to one go to. Make sure and put a cap or plug this. You can block them - but - I prefer correct replacement. You can buy caps from auto parts store and plug with them and use zip tie to hold them on. Or spend 50 bux for fancy billet covers.
Yeah we should be happy...lol
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rebuilt Engine...ski does not start now!!
By krouchchocolate in forum 4-Tec PerformanceReplies: 59Last Post: 05-05-2014, 05:22 AM -
Starter turns on 951 engine. But does not engage and turn over engine
By Markyk49 in forum 2-Stroke PerformanceReplies: 4Last Post: 06-07-2011, 06:11 PM -
dealers in CT area does not have wgs in stock, where else can i get one?
By 98gsxl951 in forum Honda Open DiscussionReplies: 8Last Post: 07-08-2010, 02:07 PM -
GP 1200 Head - does anyone have one that they do not want or sale?
By o0 RASTA 0o in forum Yamaha Old School SkisReplies: 11Last Post: 07-08-2009, 08:38 AM -
Retirement Does Not Have To Be Boring !!
By RX951 in forum Yamaha Open DiscussionReplies: 3Last Post: 05-27-2006, 09:30 AM
I think the crankshaft is the main component needed to change the stroke...
FZR-R3 Turbo build