Results 1 to 4 of 4
Thread: F15x RPM Cut off ??
-
08-05-2015, 11:14 AM #1
F15x RPM Cut off ??
I have a pair 08 f15x. One is stock and one has a few mods.
They both have the same top speed (67mph) and are equal when raced on flat water.
The stock ski holds 6450 rpm at top speed
The modded ski feels restricted as the rpm's go up and down at top speed.
They are going back and forth from 6800 to 6300 and the ski surges.
As far as I can see it has ride plate machined, intake grate modded. Cone air filter and breather. I also put a straight pipe exhaust on it.
-
08-07-2015, 03:56 PM #2
- Join Date
- Jan 2008
- Location
- Currituck, North Carolina, United States
- Posts
- 4,995
- +1
- 290
I believe it's 6700.....sounds like you need to re pitch prop some as your on limiter
-
+1 by:
-
08-12-2015, 08:00 PM #3
- Join Date
- Jun 2012
- Location
- canada qc
- Posts
- 137
- +1
- 5
mine run 6940/6960 rpm and running good . not completely sure but the soft cut is 7000 and hard cut at 7200
-
+1 by:
-
10-26-2015, 07:54 AM #4
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2011 FX SHO engine cutting off after run WOT ...Only hitting 6500 RPM
By Yamaha:) in forum Yamaha PWC Performance (4-stroke)Replies: 19Last Post: 05-17-2015, 05:30 PM -
2000 xpl low rpm runs stronger when I cut off the fuel !!
By zackz28 in forum 2-Stroke PerformanceReplies: 8Last Post: 07-26-2010, 08:08 AM -
1997 seadoo xp cutting off
By ariess10 in forum 2-Stroke PerformanceReplies: 3Last Post: 12-23-2007, 10:20 PM -
1994 Seadoo SP WO throttle cuts off
By Stumpotto in forum 2-Stroke PerformanceReplies: 1Last Post: 10-10-2007, 06:55 AM -
Raider Ride Plate Cut Off
By BULLRAIDER in forum Yamaha Old School SkisReplies: 4Last Post: 08-22-2006, 09:31 AM
The clips that you need are 291004813 called housing nut M6 Assy. On my...
2018 seadoo gtx removing engine...