Results 1 to 10 of 11
Thread: Converting a 2Up to a 3Up.....
-
08-04-2015, 10:16 AM #1
Converting a 2Up to a 3Up.....
Has anyone created a definitive list of parts to turn a 2Up Spark into a 3Up?
I am only talking about the rear platform etc, seat and grab handle not required.
-
08-05-2015, 07:23 AM #2
-
08-05-2015, 07:27 AM #3
The stuff you need is the platform(2 parts, upper "cover" and the lower platform wich holds the foam) and then the foam itself
-
08-05-2015, 07:33 AM #4
Converting a 2Up to a 3Up.....
And the srews, 12 of the t30 ones. And some others to bolt the 2 platform pieces together, wich i dont know the type of...
-
08-05-2015, 09:45 AM #5
-
08-05-2015, 10:40 AM #6
yup planning to do this myself: http://www.seadoospark.org/forum/89-...onversion.html
-
08-25-2015, 05:51 AM #7
-
08-25-2015, 08:09 AM #8
-
08-25-2015, 09:25 AM #9
OK so they should be the same part.
Do you know how many of each type of bolt is required for installation?
-
08-25-2015, 10:24 AM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
converting my 2up to 3up conversion
By Cheappc in forum Sea Doo SparkReplies: 23Last Post: 02-27-2016, 04:18 PM -
Converting a XLT to a GPR?
By Yellow93 in forum Yamaha PWC Performance (2-stroke)Replies: 12Last Post: 10-11-2007, 10:37 PM -
Convert short pump to long?
By mystahagy in forum Polaris PWC PerformanceReplies: 12Last Post: 09-21-2007, 11:46 PM -
50 mph Quadski converts from PWC to ATV in five seconds
By MikeTrin in forum Sea Doo Open DiscussionReplies: 5Last Post: 05-31-2006, 07:45 PM -
50 mph Quadski converts from PWC to ATV in five seconds
By MikeTrin in forum Yamaha Open DiscussionReplies: 3Last Post: 05-31-2006, 03:20 PM
You are correct Steve! There was a slight blockage in the fitting of...
I just bought a 2002 1200 STX-R....