Tethering a Garmin Etrex

[DPG98GSXL]

Does anyone'e tether their Garmin... I have a Ram mount and use it but, just in case IF it were to fall out or forced out... How and where do you tether it... I looked and all I see on the back of the Garmin is the battery door/wire (whatcha ma call it) to attach the tether to... What if the force pulled the door off? Garmin gone!! It does not float anyway.
Does anyone have a good tethering way to attach?

BTW: I would be using my Go Pro tether strings and sticky backs.

Any thoughts or ideas?

Thanks
DG

[Guidoo]

I have a lanyard attached to mine. I don't have access to it at this moment.

[Treemn]

I use a old shoe lace there is a small area on the bottom it will thread through will try and post picture. You may reconize it lol

[DPG98GSXL]

Yep. U might be right.. LOL.

I see what you are talking about now... The GP tether string fit perfect in the slot...
Thank you Scott

[Treemn]

here is that picture of the simple tether

[mikeFZR]

Dont know what your mount setup looks like but this is mine. I drilled two holes in the "arms" of the RAM mount and use a zip tie each ride so that GPS physically cannot be bounced out. 160+ hours going strong. Bulletproof.