Best empeller for my rxp 255

[kartracer]

Its all stock,i need to replace that & the wear ring. Thanks

[travis ingram]

Solas 14/19

[kartracer]

ok ty

[Redsea_rider]

Solas 14/19 R

[not2fast]

I was going to ask the same. I am thinking intake and grate for mine.

[not2fast]

I was going to ask what the R means, but found this thread.

http://www.greenhulk.net/forums/showthread.php?t=204902

[not2fast]

It has probably been covered somewhere else, but what would be the best mods to get more top end out of these without touching motor, exhaust, intake? Grate and prop?

[Green Hulk]

It has probably been covered somewhere else, but what would be the best mods to get more top end out of these without touching motor, exhaust, intake? Grate and prop?

Going off the skis in your signature. This is what you would want for the RXT-X260
V-Tech tuning bundle package
http://www.4-tecperformance.com/inde...oducts_id=2791

15/19R impeller
http://www.4-tecperformance.com/inde...oducts_id=2239

Intake grate
http://www.4-tecperformance.com/inde...oducts_id=2298

You said "no intake," but please consider that the stock air intakes on those skis are extremely restrictive. You would want to use this air intake and catch can on both your RXT-X 260 and RXP-X 255
Kanaflex do it yourself air intake kit
http://www.4-tecperformance.com/inde...oducts_id=1160

catch can
http://www.4-tecperformance.com/inde...oducts_id=2887

For the RXP-X 255 use this intake grate
http://www.4-tecperformance.com/inde...roducts_id=862

This impeller
http://www.4-tecperformance.com/inde...products_id=12

These OPAS blockoff plates
http://www.4-tecperformance.com/inde...roducts_id=302

You would use this impeller tool for both skis to change the impellers
http://www.4-tecperformance.com/inde...roducts_id=391


Hope that helps!
Jerry

[Carlos Thomas]

What Jerry recommended will get you 74 to 75 MPH on the GPS with strong acceleration.

[not2fast]

How loud is the intake?

I could see doing this to my RXPX and keeping the RXTX where it is.