Results 1 to 9 of 9
-
07-30-2015, 03:59 PM #1
- Join Date
- Jun 2015
- Posts
- 173
- +1
- 11
NEED help please>>>Jerry i need to contact you
my dealer just call me to let me know the Supertech Valve retainer and spring kit dont come with the valve seat..what you suppose to do???
..help please..Jerry i order the package from the online store..
-
07-30-2015, 04:36 PM #2
Valve seat is in your head.... You'll have to lap your valves in.
-
+1 by:
-
07-30-2015, 05:11 PM #3
- Join Date
- Jun 2015
- Posts
- 173
- +1
- 11
im talking about the sprint seats...should i suppose to use the old(stock) ones..???
-
07-31-2015, 07:42 AM #4
if the stock valve keepers have the same grooves as the new valves, then u reuse them. Stock are 3 groove BTW.
If your talking about the valve seals, u can reuse them if low hrs & good condition, But should replace them, since your in there, and don't want to have to pull apart later if they go bad down the road...
-
07-31-2015, 07:47 AM #5
Spring seats? The Keepers are specific to the valves. But it just depend on what your talking about. Pictures of what you think your missing. Sounds like your dealer isn't very good at working on skis lol
-
07-31-2015, 08:07 AM #6
- Join Date
- Jun 2015
- Posts
- 173
- +1
- 11
Yes..the valve steam seals..on the bottom of the spring..should I reuse them...????
-
07-31-2015, 08:34 AM #7
while its apart, It wouldn't hurt to upgrade them...
http://www.4-tecperformance.com/inde...oducts_id=3123
-
07-31-2015, 09:03 AM #8
I think your talking about the bases washers, I used the stock ones when I did the Supertech upgrade, I used the riva tool to remove the springs... Also, you will need to replace the rocker shaft bolts (6), they don't come in the kit...
http://www.4-tecperformance.com/inde...roducts_id=822
-
07-31-2015, 07:24 PM #9
- Join Date
- Jun 2015
- Posts
- 173
- +1
- 11
thank you guys..
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
i need help garrett gt 30r
By elfonta in forum 4-Tec PerformanceReplies: 1Last Post: 08-17-2010, 02:58 PM -
Changing out bearings: need some help please
By SeaDoocer in forum 4-Tec PerformanceReplies: 8Last Post: 11-06-2006, 12:51 AM -
Need a little help please...
By lafjax in forum 4-Tec PerformanceReplies: 18Last Post: 09-08-2006, 07:00 PM -
Need HELP Please!
By GeoRXT in forum 4-Tec PerformanceReplies: 8Last Post: 05-30-2006, 08:04 AM -
HEy Guys Need Help PLEASE!!!
By SpeedStang95 in forum 4-Tec PerformanceReplies: 5Last Post: 05-06-2006, 01:29 AM
If you can't find any good used ones for sale you could always have yours...
Wtb 2 jugs for my ultra 150