Results 1 to 3 of 3
-
07-23-2015, 05:15 PM #1
- Join Date
- Jul 2015
- Posts
- 11
Gel coat damage question with pictures
Ok I know if the damage shows matting from the fiberglass it's a bad thing but at what point do you get alarmed at damaged areas? This is not mine, however it is one that I'm considering buying. This chip is outside of the footboard above the waterline, apparently a dock was the culprit. It appears to be a chip in the gel coat only exposing the filler over the fiberglass. I haven't seen the ski in person as its 3 hours away, hence why I've requested the pics from the seller. What do you guys think?
JonLast edited by jm_obrien; 07-23-2015 at 05:15 PM. Reason: to subscribe
-
07-23-2015, 09:28 PM #2
- Join Date
- Aug 2013
- Location
- Waterloo ON
- Posts
- 381
- +1
- 35
Simple repair with some Gelcoat
-
07-23-2015, 10:33 PM #3
Yeap that is nothing, really. Grab some black gelcoat, wipe area with acetone, brush on the gelcoat a bit thicker, wait till it hardens, wet sand, rubbing compound than some wax, good as new.
-
+1 by:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
09 rxpx gel coat damage, need assistance
By 98gsxl951 in forum Sea Doo Open DiscussionReplies: 8Last Post: 05-04-2012, 08:41 PM -
Flushing ride plate - questions with pictures...
By Jim-C180 in forum 4-Tec PerformanceReplies: 4Last Post: 05-05-2010, 02:05 PM -
Gel coat damage
By benobo in forum Sea Doo Open DiscussionReplies: 8Last Post: 04-01-2010, 05:16 PM -
Questions with pictures attached
By MikeB in forum Sea Doo Open DiscussionReplies: 7Last Post: 02-16-2007, 11:31 PM -
impeller questions.. with pictures
By jcc011185 in forum Polaris PWC PerformanceReplies: 22Last Post: 09-27-2006, 02:59 PM
There is a wear ring....it looks in very rough shape. Send it to Steve...
Does this look like an issue?