Results 1 to 5 of 5
-
07-21-2015, 12:26 PM #1
- Join Date
- Jul 2014
- Posts
- 122
- +1
- 2
Possible to install a 760 (64X) motor on a 1994 wave raider (purple hull)?
Possible to install a 760 (64X) motor on a 1994 wave raider (purple hull)?
-
07-21-2015, 07:23 PM #2
-
07-22-2015, 06:48 AM #3
- Join Date
- Jul 2014
- Posts
- 122
- +1
- 2
I saw yesterday a mounting kit for the wave blaster to mount 65U. Wonder if it would work for the raider too///
-
07-22-2015, 02:45 PM #4
Yes it would..
There are a couple of companies that make the conversion plates to adapt to the two cylinder mount holes.
- For sure the later raiders came with both mounting options already installed in the hull..
I'm not certain what the setup is on the 1994 purple hulls.??
- (It may also already be set up for a triple cylinder motor)
The reason I only considered the idea was, I had the chance of a hull with a blown motor a good while ago.
- Unfortunately It was just a little too for away to go collect it.
Anyway, at 150kg all up, they're only slightly heavier than a blaster 1.
- Then figure it, with a hot 65u would put that to about 170-175kg (maybe less)
- Pushing it to 170+ hp puts you around 1000bhp per ton..!!!
Mental performance Guaranteed.....
.
-
07-22-2015, 02:51 PM #5
- Join Date
- Jun 2014
- Location
- MS Gulf Coast/Abbeville, LA
- Posts
- 170
- +1
- 17
you need gp760 parts? i have a 760 that i am tired of messing with. will gladly part it out if you are interested
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Possible to install 12v power socket on Yamaha VX Deluxe?
By IIIEXOCETIII in forum Yamaha Open DiscussionReplies: 8Last Post: 07-30-2014, 10:25 AM -
Looking for New Mexico Sea-Doo RXP or RXP-X to install our Water/Methanol kit on.
By obiwan in forum 4-Tec PerformanceReplies: 1Last Post: 04-17-2013, 12:39 AM -
looking for a 760 64x motor
By Lvnspeed in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 08-05-2011, 05:35 PM -
Hard to install TDR Rear Exit waterbox on RXP-X?
By Ocman in forum 4-Tec PerformanceReplies: 14Last Post: 11-20-2009, 07:40 PM -
Possible to use a stock 06 ECU on 04Engine?
By cckeong in forum 4-Tec PerformanceReplies: 1Last Post: 08-30-2009, 08:41 PM
Guess they changed the engine cover supports on the later models. Those...
NEW RIVA Yamaha 2012 & Newer 1.8L...