I need some info on the 09-14 and 15 FZR motors if any of you FZR gurus could help?

[SJ-(KY)]

First does anyone know what trigger wheel comes in the 09-14 1.8l FZR motors and does the 15 have the same trigger as the 09-14 or is it different?
Does anyone know where I can find the ECU pin out for the 09-14 FZR motors and a ECU Pinout for the 15 as well?
if anyone could give me a brief description of the differences between the 09-14 and 15 ECU's it would help my cause tremendously..lol.. To make a long story short I'm trying to get a ECU on my 15FZR before hydrodrags and without this info it'll make my job a good bit harder.. Any help would be gladly appreciated!!

[Region8Ultra250X]

......

[Region8Ultra250X]

are you basically trying to put an SHO ECU on an SVHO motor? shoot jerry a PM. i know he's done it. he was running a reflashed early SHO ecu with a harness modification on the SVHO.

[Region8Ultra250X]

Per Jerry

An SHO ECU can be reflashed to work on an SVHO ski however you do lose the tach function on the dash. Not a big deal as most everyone goes to an aftermarket tach anyway such as a TTO tach which is available via the sites online store.

[SJ-(KY)]

No I'm wanting to run a Aftermarket ECU (EMS) on my ski but the PNP harness is set up for 09-14 FZR/S skis and I have a 15 with the different ECU..It sounds to me like the trigger is the same if guys are using SHO Ecu's and they are probably repinming the harness or resocketing the ECU.. I'd just like to have a confirmation and maybe some insight..

[Region8Ultra250X]

shoot Vspec1 a pm. he works with dean charrier. they are running standalones on the newer ski's he may have insight on it for you

[SJ-(KY)]

Ok great thank you for the leads I really appreciate it!I'll look him up..

[riick370]

AFAIK the only difference between the 2014 and 2015 ECU is the 2015 is programmed different, but the pinout I think is the same as the 2014.

I can verify this weekend with my buddy's 2014.

[SJ-(KY)]

Rick370 that would be great man!! Vspec1 cannot except anymore pm's.. :-/

[big john]

the crank position sensor and trigger wheel are the same, nothing changed in the pto of the motor