Seadoo rxp 255 supercharger clutches

[C-kit]

Hi can any one tell me how to tell if your clutches are worn without it slipping id like to know by looking at used clutch washers can you actually see were the clutch is warn thanks i have just rebuilt my c kit supercharger and used the oem clutches and i had a set of les cook washers heres the pic of my used clutches can anyone see if theres anything wrong with them

[bluestram]

Measure the width with a set of calipers

[C-kit]

Ok thanks do you know the specs on what they should be or should i just go off a new set and also are they meant to be equal if measured by calipers as i can noticeably see a diffrence in one of them not being as thick as the other so thats how you tell if your clutches were actually slipping by measuring ? Thanks

[Snoman]

All Im gonna say is those clutches are garbage...Not only are they worn,they are old and have been known to break in the past...I dont know what you plan on re using them in BUT if this were me i would NOT be putting them washers in ANY Scer...

[RXP6]

Those Les Cook clutches are titanium coated and once they start to loose thickness the underlying bare metal will be exposed.
The new OEM washers are definitely better but the used les cooke look usable.

[C-kit]

Ok thanks i dont have any intention on re using them just wanted to know how you tell if there worn thanks just installed the new seadoo clutches they seem good when do tou guys think i thould re tourque my clutches as i hear on the c kit you need to do it after installing new clutches and going for about 2 rides thanks

[bluestram]

The shop manual has the service limits for washer thickness. But if you're using aftermarket products, who knows???