Results 1 to 6 of 6
-
07-08-2015, 06:38 AM #1
How to tell a 255/260 charger from a 215
Is there anything I can measure or a part number on the charger? Buying one from local guy but just want to make sure what I'm buying/ looking at
-
07-08-2015, 08:21 AM #2
The 255/260 has bolt holes on the front of the charger around the air intake and the blades are thinner (if u have ever seen a 215 impeller)
-
07-08-2015, 08:42 AM #3
The first 2 are an X(255/260)charger,The second 2 are a 215 charger..take note of the fins in the valute....
The 215 has 6 fins were the X charger has 8
-
07-08-2015, 09:18 AM #4
So this one that I'm looking at looks like a 255 then
-
07-08-2015, 10:30 AM #5
-
07-08-2015, 12:01 PM #6
also most (every one I have seen) X chargers have the extra set of 4 mounting holes on the front cover
they are the same holes ET uses to mount up their SC water cooler
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
how to tell a X SC from a 215 SC...
By lextoy in forum 4-Tec PerformanceReplies: 5Last Post: 08-17-2012, 01:01 AM -
How to tell RXPX sc from a 4-tec SC
By Lvnspeed in forum 4-Tec PerformanceReplies: 7Last Post: 08-17-2009, 05:44 PM -
How to tell an SBT engine from a stock yamaha engine? (1200 non-pv)
By jcc011185 in forum Yamaha Open DiscussionReplies: 10Last Post: 07-22-2007, 09:15 AM -
How to tell if you need a new wear ring?
By NateGP1300R in forum Yamaha PWC Performance (2-stroke)Replies: 10Last Post: 06-05-2006, 12:22 AM -
How to tell which one this ECU is?
By Tennessee in forum 4-Tec PerformanceReplies: 9Last Post: 05-14-2006, 07:13 AM
Hello, I am looking for some insight on what is required to turbo a Yamaha...
FX140 Turbo Project