Results 1 to 3 of 3
Thread: 2004 FX HO Cruiser Pilot Outlet
-
07-06-2015, 08:17 AM #1
2004 FX HO Cruiser Pilot Outlet
What should the output on this pilot outlook look like? I'm new to this ski and my old 1999 xlt760 produced a steady stream and this one is a bit sporadic out the port side. I've not see anything out the starboard side. What is normal for this ski?
Thanks...
-
07-06-2015, 04:29 PM #2
- Join Date
- Oct 2009
- Posts
- 220
- +1
- 17
On the hose it may be only a drop or two, or only water vapor coming out the port side depending on your water pressure. You won't see anything out of the starboard side on the hose unless you have lots of water pressure. The starboard side only opens up when the ski reaches a certain temperature, so you are usually riding it and don't see it happen. As long as the overheat alarm is not going off, you are probably OK. You can put the nose of the ski down, and clamp off the water inlet line if you want to put more water into the system on the hose. You loose a lot of water out of the inlet line on the hose.
-
07-07-2015, 08:36 AM #3
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2004 FX HO Cruiser Pilot Outlet
By alchik in forum Yamaha PWC Performance (4-stroke)Replies: 6Last Post: 07-06-2015, 10:25 AM -
2004 FX HO Cruiser -- A Perplexing Overheat Indicator and Lack of Power Problem
By demetri in forum Yamaha PWC Performance (4-stroke)Replies: 0Last Post: 06-23-2014, 08:47 AM -
How do you remove black plugs for stern corner gunwale on 2004 FX HO Cruiser?
By sledder in forum Yamaha PWC Performance (4-stroke)Replies: 4Last Post: 04-07-2013, 05:48 PM -
FS 2004 FX HO Cruiser
By gators8 in forum Yamaha 4 Stroke SkisReplies: 3Last Post: 02-26-2012, 08:47 AM -
2004 fx ho cruiser deck parts
By decotabd in forum Yamaha Open DiscussionReplies: 2Last Post: 03-01-2009, 08:53 AM
So I tried a good hour and a half to take care of this guy today: I...
Help needed: impeller housing...