Results 1 to 4 of 4
Thread: 2003 gtx starter
-
07-04-2015, 08:01 AM #1
- Join Date
- Jun 2015
- Posts
- 15
2003 gtx starter
Been tryin to find info on removing the starter on a 2003 seadoo gtx 4 tec...where IS the starter? I read it's not a hard job but can't find a pic of where it's at...how big or hard of a job is this? Thanks
-
07-05-2015, 08:56 AM #2
- Join Date
- Jun 2015
- Posts
- 15
Ok guess I asked in the wrong place thanks for the help lol
-
07-05-2015, 09:16 AM #3
you cant see it because it is under the exhaust manifold
its a done by feel job
or pull the manifold to see what your working on
there is 2 bolts at the rear of the starter near the nut for the electric cable
its not too bad to do with the manifold on the motor
removing the mani would be a much harder job than just removing the starter
here is a feebay photo of the starter
http://www.ebay.com/itm/SEADOO-4TEC-...5cdb6e&vxp=mtr
-
07-06-2015, 03:35 PM #4
- Join Date
- Jun 2015
- Posts
- 15
Awesome thanks looks like I may need one soon...spins over slow when hot after sitting for a minute... battery's good and has a new relay
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2003 GTX Starter Relay
By eagle28 in forum Sea Doo How To & FAQsReplies: 0Last Post: 07-12-2014, 06:37 PM -
2003 GTX Supercharged wear ring problems
By Zilla57 in forum Sea Doo Open DiscussionReplies: 8Last Post: 07-10-2006, 12:11 PM -
2003 gtx problem
By joelykool in forum Sea Doo Open DiscussionReplies: 4Last Post: 07-10-2006, 10:16 AM -
2003 GTX SC not getting up to Speed Or RPMs ! Help !
By RXPBeast in forum Sea Doo Open DiscussionReplies: 11Last Post: 06-11-2006, 09:32 PM -
adding external intercooler to 2003 gtx sc motor
By rapidacceleration in forum 4-Tec PerformanceReplies: 12Last Post: 05-12-2005, 08:17 AM
Check the water regulator on the waterbox. If that is leaking or has a...
1998 XP Mid Bog Issue