Results 1 to 3 of 3
-
06-30-2015, 10:26 AM #1
- Join Date
- Jun 2015
- Posts
- 2
2000 virage tx hard starting when its cold
I have a question for you guys... I have a 2000 virage tx. It runs great but now this year it has a hard time starting...cranks just fine but takes forever to fire when its cold. When its warm it fires right up. What could the issue be? Worn rings? Any ideas?
-
06-30-2015, 10:42 AM #2
- Join Date
- Jul 2007
- Location
- near Toronto, Canada
- Posts
- 46,547
- +1
- 2,711
If you prime the carburetor air intakes with gasoline does it start quickly?
Remove the flame arrestor cover and dribble just a teaspoon into each carb throat.
Stand aside and press Start, with the choke in the normal cold start position.
-
07-02-2015, 04:41 PM #3
- Join Date
- Jun 2015
- Posts
- 2
It seems to start good when I squeeze the throttle 3-4 times before starting it with the chock in the run position. Sorry I have been busy and havnt had much time to mess with it
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2000 Virage tx 1200 won't turn off when the key was out. Or start it w/o key
By ldoan in forum Polaris Open DiscussionReplies: 7Last Post: 07-30-2017, 04:15 PM -
02 Virage TXI hard starting when cold, might have narrowed it down on mine? Help!
By Bigbill55 in forum Polaris Open DiscussionReplies: 5Last Post: 06-29-2012, 09:13 AM -
2000 Virage TX Mechanical starting problem flywheel damaged
By gsbmueller in forum Polaris Open DiscussionReplies: 2Last Post: 05-22-2012, 02:58 PM -
2000 virage will only start when solenoid crossed
By sadams123 in forum Polaris Open DiscussionReplies: 7Last Post: 04-26-2009, 09:11 AM -
2000 Virage tx 104 hours - should I buy it?
By prt in forum Polaris Open DiscussionReplies: 5Last Post: 03-30-2007, 09:12 PM
This 15/19 would be the correct pitch for your mods...
Prop selection