What size t-Bolt clamp for SHO throttle body coupling?

[Ski Hacks MG]

Anybody know what size t-bolt clamp fits the OEM SHO throttle body coupling? Brand and part number would be sweet!

[big john]

the problem with a T bolt clamp on a SHO TB is the lack of space for the clamp, you end up clamping the hose on the lip that's intended to keep the hose from blowing off, the OEM clamps work very well and fit that TB just right. my SHO has nothing but OEM clamps on it and ive never blown a hose off

[Gus13letter]

the problem with a T bolt clamp on a SHO TB is the lack of space for the clamp, you end up clamping the hose on the lip that's intended to keep the hose from blowing off, the OEM clamps work very well and fit that TB just right. my SHO has nothing but OEM clamps on it and ive never blown a hose off

Agreed. I have had more T bolt clamps come off than any others. On my FZR running up to 24 Lbs boost I used standard worm clamps and never had an issue, but would recommend the ABA clamps over any. My SVHO has these clamps on the intercooler and throttle body and exhaust manifold to waterbox from factory, but unfortunately they werent tightened enough and I blew one off of the intercooler. All are tight now and shouldnt have a problem.

You can find the ABA clamps here -
http://shop.marshfasteners.com/products.asp?dept=127

[Slamdcoop0428]

17 psi here with regular worm clamps and oem clamps

[Ski Hacks MG]

10-4, thanks guys.