Results 1 to 4 of 4
-
06-17-2015, 09:04 PM #1
- Join Date
- Aug 2013
- Posts
- 17
Possible to make your own beach dolly?
Hi guys,
I'm trying to figure out how to build a simple beach cart/dolly to transport my 2014 superjet from a parking lot to the water through the beech sand. I hate to spend 400-500 on a dolly and curious if it is hard to make one. Any suggestions?
-
06-17-2015, 10:37 PM #2
-
06-18-2015, 10:17 AM #3
You are thinking about it the wrong way. Think of it as an investment that you will recover your money when you sell it.
I bought a "Tiger Tote" and its the best for the price: (he has been doing this longer than anyone)
http://www.floridasailcraft.com/JetProducts.htm
I used mine all the time for a long time and sold it at a $50 loss. I used it in salt and it held up great. The plastic wheels (good luck trying to source them), phenolic axle sleeve and aluminum axle are maintenance free. If you can't weld, don't bother. Even if you can weld, go price out the parts and you will seen see that its not worth it.
Even though my Tiger Tote was for my SuperJet, I have used it on X4 and XPL seadoo's and it handled the extra load with no issue.
-
06-18-2015, 06:09 PM #4
- Join Date
- Aug 2013
- Posts
- 17
Tiger tote it is! Thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
How to make your own Ficht EMM Communications cables (2872454 & PW-45776 equivalent)
By K447 in forum Polaris Tech Tips and InfoReplies: 59Last Post: 12-13-2020, 08:18 PM -
How to make your own PW-47166 MSX driveshaft coupler removal tool
By K447 in forum Polaris How To & FAQsReplies: 9Last Post: 07-08-2014, 01:45 PM -
How To Make Your Own T Handle Carb Screws
By Cutlass in forum Yamaha How To & FAQsReplies: 5Last Post: 01-09-2011, 08:50 PM -
How to make your own rrfpr?
By Thegaragejavea in forum 4-Tec PerformanceReplies: 2Last Post: 02-17-2009, 02:16 PM -
would it be possible to make your own tripple pipes?
By jcc011185 in forum Polaris PWC PerformanceReplies: 4Last Post: 10-01-2006, 08:11 AM
The best I could do was to get 2 bolts started. Maybe with some machine...
Riva ride plate FX holes not...