Fault code P1616?

[Markp-rxt]

Does anyone know what fault code p1616 means on a 2013 sea doo rxt-x. I was riding yesterday and all of sudden the engine light went on and ski went into limp mode.

[beerdart]

Fault	P1616
Descrption	Throttle Position check or learnign fault

[Markp-rxt]

How can I fix it?

[Sanfish]

Does anyone know what fault code p1616 means on a 2013 sea doo rxt-x. I was riding yesterday and all of sudden the engine light went on and ski went into limp mode.

The latest manual say its a damaged part. Either throttle body, harness, connector or ECM.

Out of the 4 parts listed above, its most likely its the throttle body. You also need to check your intercooler for leaks as a failing IC will kill a throttle body very quickly. I've had two throttle body units replaced on my '13.

Ideally, ski should be connected to BUDS and verify the throttle positioning and do a "close throttle" check. If you have a friend with a '12-'15 seadoo, swap the throttle body and test. TB does not need to be married/learned in BUDS like other parts and 130, 155, 215 and 260 TB are all same part.

[beerdart]

................................

[Scott]

Throttle blade is sticking due to corrosion

[jpt7779]

http://www.greenhulk.net/forums/showthread.php?t=224667

[Markp-rxt]

Throttle blade is sticking due to corrosion

If its sticking can I pull it out and clean it?

[Scott]

Throttle blade is sticking due to corrosion

If its sticking can I pull it out and clean it?

Yup, thats what I did and still working to this day.

[Markp-rxt]

Thank you everybody for your help.