Results 1 to 4 of 4
-
06-15-2015, 12:23 AM #1
- Join Date
- Apr 2014
- Posts
- 3
09 Ultra 260 wont rev past 7000 rpm
I bought a damaged Ultra 260 which would not rev past 7000 rpm which was recently overhauled. I found water in the oil and my mechanic found it had a cracked head. I had the head replaced and the oil is clean yet the craft still wont run past 7000 rpm shows 58 - 60 on Speedo. Boost reference is showing full and crafts starts, idle and accelerates smooth.
Compression is good.
-
06-21-2015, 12:37 AM #2
- Join Date
- Apr 2014
- Posts
- 3
-
06-21-2015, 05:35 AM #3
-
06-22-2015, 12:37 PM #4
- Join Date
- Mar 2012
- Posts
- 164
- +1
- 3
I second the belt. I had my motor rebuilt and after 2 yrs arguing with the shop I starting looking for myself and found the belt needed to be replaced. Before belt 7000 rpms. After I hit 8200. Man did I miss the power
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
99 Ultra 150 wont rev past 5500 rpms
By ktyamaha36 in forum Kawasaki PWC Performance (2-stroke)Replies: 9Last Post: 03-06-2017, 12:03 PM -
98 seadoo sportster engine wont rev past 5000 rpm
By jervsteve in forum Sea Doo Open DiscussionReplies: 1Last Post: 07-19-2012, 07:32 PM -
2001 Virage. Wont rev past 4500 rpms.
By timmy82 in forum Polaris How To & FAQsReplies: 3Last Post: 08-31-2011, 01:23 PM -
2003 F12-X/T13, wont rev past 5000 RPM, and first-time questions.
By Mikes88Stang in forum Honda Open DiscussionReplies: 4Last Post: 06-03-2011, 07:44 AM -
ultra 150 wont rev past 4000 rpm
By jramos in forum Kawasaki How To & FAQsReplies: 8Last Post: 07-15-2008, 06:47 PM
Never mind guys; just read the post titled Lucky 13 cone on my GP 1800...
85mm nozzle and Lucky 13 pump cone