85mm rx steering nozzle vs 89mm rxp nozzle

[ldmoore87]

Just wondering if running an 85mm rx steering nozzle will be better top end than the 89mm rxp nozzle. Also the rx nozzle is about half an inch longer not sure what effect that will have but everything will bolt right up to it bedsides opas which I'm not using anyways. Any thoughts?

[imp0ster]

I think you mean a venturi nozzle and the sizes are 83mm most years and 87 for the 255 X models if I'm correct. The X models look like they stick out further which the do but it's because of the pump support.

If you're looking at another steering nozzle go with the R&D Venturi. Makes a world of difference in the corners. I had to modify the shit out of mine though because it's threaded instead of using a bushing

[ldmoore87]

I'm taking about the nozzle on the very back that the steering and trim are hooked to. I have one off a 2000 rx that will bolt right up but it's just the end piece that actually moves when you turn and trim