Results 1 to 9 of 9
Thread: 2000 gpr 1200 pv HELP
-
06-07-2015, 06:45 PM #1
2000 gpr 1200 pv HELP
Okay I have a 2000 1200 gpr it is firing up and running when I pull off the back plug wire it will not run or start up on #2#1 plug is it normal ? Should it run on two cylinders ? I've been have problems with it when on the water it bogs down at wot I have replaced the complete electric box and rebuilt carbs new plugs .
-
06-07-2015, 08:07 PM #2
-
06-07-2015, 08:32 PM #3
I have spark on all three plugs
-
06-07-2015, 08:50 PM #4
-
06-07-2015, 09:52 PM #5
-
06-07-2015, 09:55 PM #6
-
06-07-2015, 10:04 PM #7
-
06-07-2015, 10:46 PM #8
I pulled out the plugs they are wet with gas and the motor shakes bad at a idle.
-
06-08-2015, 05:23 AM #9
Well I'm no expert but you've got good compression and assuming the timing is correct I'd look at the carbs. Have they ever been rebuilt? Are you still using the oil injection? Problems mean upgrades
If you're not comfortable going over the carbs yourself there's several places to send them off to.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2000 GPR 1200 pv
By em-dubya in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 08-03-2012, 10:39 AM -
2000 gpr 1200
By CAM D. in forum Yamaha 2 Stroke SkisReplies: 6Last Post: 07-31-2009, 12:35 PM -
WTB: oil pump for a 2000 gpr 1200
By stxracer86 in forum Yamaha ClassifiedsReplies: 2Last Post: 07-23-2009, 09:16 PM -
Need stock jetting for 2000 GPR 1200
By dguille in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 11-26-2006, 12:15 PM -
Need 2000 gpr 1200 opinions
By shooter98xpl in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 12-05-2005, 08:53 PM
There is a wear ring....it looks in very rough shape. Send it to Steve...
Does this look like an issue?