How to get throttle to pull 100%

[Paul2005GPR]

Using the 1200r throttle lever, rxt cable and 4tec throttle body. I can't get the throttle to pull over 76% on my candoo. If you manually move at the TB I can get it to go to 98%...how have you guys handled this?

[Steve-m31164]

For a quick fix you can use a mountain bike lever assembly. As long as it got a long throw

[Paul2005GPR]

That crossed my mind today while I was riding my bike...

[SLASHER]

Been there done that but only a temporary fix.. Some times u will need to adjust outter cable to max pull ..

[TuningForkMarine]

i have been thinking of putting a motorcyle style rotating handle for throttle.

[Paul2005GPR]

All aluminum and only $10. I will give it a shot tomorrow when I'm back at the shop

[beerdart]

Make sure you are not going passed 90deg on the throttle blade.. Candoo reads the TPS in % but it is actually deg and should never go more then 90 total. Most are in the 83 deg range because when you reset the TPS the ECU stores the idle blade angle typical is 7deg so at wot 7+83 = 90..