Hello everyone!

I have a 2008 RXP-x 255 that does not hold fuel pressure. I removed it believing i was going to install a rrfpr, but decided against it for now. I put the fuel pump on the wall where I normally fix things, and the wind knocked it down. Upon inspection, nothing appeared wrong with it. When I put on the key, it primes to around 30 psi, then drops fast - when I do it a second time, it goes up to 58, then quickly drops off again. When I start the ski, pressure quickly builds to 58 psi and stays there.

What could be the problem? It used to hold fuel pressure for quite some time, and now the pressure is disappearing quickly - but the pump itself is operational.

Thanks for any input.