Results 1 to 10 of 23
Thread: Tow valve install
-
06-04-2015, 09:30 PM #1
-
06-04-2015, 09:34 PM #2
It's not necessary.....
Good to have a strainer on your intercooler line thou...
-
06-04-2015, 10:22 PM #3
I have the IC strainer covered, but that's the first time I've seen one utilized for the engine feed line too.
Does anyone think it's cheap insurance to run a strainer for the engine feed, or just another potential failure point? Most here just use clamping pliers when towing. But props for trying to keep everything clean n safe.Last edited by WP3223; 06-05-2015 at 06:27 AM.
-
06-05-2015, 06:23 AM #4
Where is this crap coming from?? Three tow valve threads in a few months?!?!?! what the hell is going on in the PWC land??
A tow valve on your yami is a Terrible terrible Idea, especially since your ski doesn't need it. As we learned from some other ding dong that did this, its also Great way to kill your warranty too.
-
06-05-2015, 08:17 AM #5
- Join Date
- Feb 2007
- Posts
- 112
- +1
- 23
Very bad idea to use a "tow valve". I would only suggest using a strainer/filter on the intercooler line only. If you want to close off the water feed line when you tow, Sea Doo makes a pincher tool that works well. (part#529032500) I would go this route instead of a tow valve........if you have the need to close a water feed line.
-
06-05-2015, 09:11 AM #6
-
06-05-2015, 09:49 AM #7
I wouldn't do neither... It is not needed...
-
06-05-2015, 12:45 PM #8
-
06-06-2015, 03:27 PM #9
-
06-06-2015, 04:52 PM #10
Tow valves aren't needed for Yamalogs!!!!
As I previously stated. I ran out of gas at 70 mph and got towed at like 45-50 mph and I then took off the exhaust pipe off the water box and it was bone dry!!!!
It is not necessary, Julio...
-
+1 by:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Tow valve installation
By Patrickspark in forum Sea Doo SparkReplies: 21Last Post: 06-09-2016, 06:47 AM -
Which hose do I install tow valve ?
By Williamsmith1986 in forum 4-Tec PerformanceReplies: 5Last Post: 02-16-2016, 11:29 PM -
RIVA GAS POWER VALVE INSTALLATION INSTRUCTIONS.
By RX951 in forum Yamaha How To & FAQsReplies: 24Last Post: 08-28-2013, 06:32 PM -
how to install tow tap/ tow valve
By chum in forum Kawasaki How To & FAQsReplies: 0Last Post: 10-23-2012, 11:48 PM -
Gas valve install?
By John in forum Yamaha How To & FAQsReplies: 18Last Post: 05-04-2006, 04:48 PM
Maybe my housing is different but at the most 3 and it has always resisted...
2014 VXR lost power- max speed...