Results 1 to 1 of 1
-
06-04-2015, 06:54 PM #1
- Join Date
- Aug 2013
- Posts
- 32
starter solenoid. tigershark montego 1995 no power
I have a 95 Montego. Were issue. when i push the starter it only clicks. pulled the electrical box open and checked all connections. brand new battery and good fuse. this is what happens main power to starter solenoid has full power. switched side of solenoid has full power when the wire going to the starter is not connected. touch the red wire that goes to the starter to the post and no power. If i jump the posts the starter works fine . if i connect a test wire to the switched post , power runs through. if i connect the wire from the starter to the post then no power. The solenoid seems to be working fine , clicks and transfers power between posts as long as the wire to started is not connected. battery good, starter works if power is sent to it. fuses are good. lanyard connected. any thoughts????
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
97 Wave venture 1100 no power to starter/solenoid
By skyshark186 in forum Yamaha PWC Performance (2-stroke)Replies: 0Last Post: 09-19-2013, 09:35 AM -
no power from start button to starter solenoid
By spacecwboy in forum 4-Tec PerformanceReplies: 24Last Post: 08-12-2013, 10:14 PM -
seadoo xp 787 no power to starter solenoid , possible mpeg failure???
By Sniffer in forum Sea Doo Open DiscussionReplies: 0Last Post: 07-20-2013, 03:55 AM -
Starter Solenoid on a 1995 GTS
By vwmikey99 in forum Sea Doo Open DiscussionReplies: 1Last Post: 07-22-2011, 11:19 PM -
1995 seadoo spotster jet boat no power
By harry hucklebury in forum Sea Doo Open DiscussionReplies: 0Last Post: 07-20-2010, 04:32 PM
The best I could do was to get 2 bolts started. Maybe with some machine...
Riva ride plate FX holes not...