Svho solas 13/20 "big hub" on my sho

[Slamdcoop0428]

Currently have a riva 160 liner in my ski with a skat 160 13/17.5

I just put the et 15.5 in my ski. I have been trying to do some reading and it seems this prop could be used on my ski but I would have to use a spacer on the driveshaft to keep the blades away from my pump veins correct? And possible have to massage the impeller down just a tad to fit my riva sho 160 liner, is that also correct? I really don't want to have to put an entire svho setup in my ski if this prop could be made to work with my current setup.

Seems like this is an awesome prop for top speed gains and launching the ski.

If anyone could give me some info I think I will make the switch.

Thanks you

[Willfzs]

Hit up leendert or fxslowkroozer they have both used that setup

[Slamdcoop0428]

Hit up leendert or fxslowkroozer they have both used that setup

Will do, I just want to confirm I can just use a spacer to fit this prop. I spent good money on this Riva 160 liner and would love to just keep using it with the big hub solas.

[JIM'S PERFORMANCE]

yes you can use the old style pump and shaft but must space away.

[Slamdcoop0428]

yes you can use the old style pump and shaft but must space away.

Awesome! Thank you Jim. Guess I'll have a Basically brand new skat prop for sale.

[JIM'S PERFORMANCE]

i like to space the blade to the vein about 1/4 inch away 250 thousands that is what i found to work good.

[Slamdcoop0428]

i like to space the blade to the vein about 1/4 inch away 250 thousands that is what i found to work good.

ok great! When I get the prop ill send it to you to be pitched. I'm thinking around the same as Henry which was a 13/18.5 I believe.

[JIM'S PERFORMANCE]

i like to space the blade to the vein about 1/4 inch away 250 thousands that is what i found to work good.

ok great! When I get the prop ill send it to you to be pitched. I'm thinking around the same as Henry which was a 13/18.5 I believe.

do you have cam gears

[Slamdcoop0428]

i like to space the blade to the vein about 1/4 inch away 250 thousands that is what i found to work good.

ok great! When I get the prop ill send it to you to be pitched. I'm thinking around the same as Henry which was a 13/18.5 I believe.

do you have cam gears

No I do not. I'd rather not have to get those right now.

[JIM'S PERFORMANCE]

then the pitch will be less.