Results 1 to 9 of 9

Thread: SHO 160mm prop

  1. #1

    Join Date
    May 2015
    Location
    Alabama
    Posts
    107

    SHO 160mm prop

    I tried to search for this but couldn't find the answer.

    2014 SHO. Im ordering the R&D 160mm wear ring which will bolt to my 155mm pump. Then I'll use a Skat 160mm prop. All the 160mm props state they are for a SVHO.

    I read that I will need a spacer to mount the 160mm prop on my SHO shaft. What size spacer or can I buy a kit somewhere?

    Thankyou.


  2. #2
    Slamdcoop0428's Avatar
    Join Date
    Aug 2014
    Location
    Cape Coral, FL
    Posts
    1,004
    +1
    253
    You need this I'm guessing if you have an sho

    its what I ordered in a 13/19 custom pitch

    http://www.4-tecperformance.com/inde...oducts_id=1451

  3. #3
    HydroStream6's Avatar
    Join Date
    Jun 2012
    Location
    New York
    Posts
    671
    +1
    94
    I believe the SVHO "160mm" and the older "160mm" are also slightly different in diameter as well. May want to check on that.

    Also, if you do end up running an SVHO prop, you can either move you shaft out of the pump a bit or just run a spacer under the prop.

  4. #4
    mcederna's Avatar
    Join Date
    Apr 2015
    Location
    Miami
    Posts
    215
    +1
    12
    so no need to get a 160mm pump?

  5. #5
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,971
    +1
    2,768
    Quote Originally Posted by mcederna View Post
    so no need to get a 160mm pump?
    No, you can run this 160mm R&D wear ring on your stock pump
    http://www.4-tecperformance.com/inde...ducts_id=2152f

    and then use this 160mm impeller in a pitch of your choosing
    http://www.4-tecperformance.com/inde...oducts_id=1451

    hope that helps!
    Jerry

  6. #6
    mcederna's Avatar
    Join Date
    Apr 2015
    Location
    Miami
    Posts
    215
    +1
    12
    Quote Originally Posted by Green Hulk View Post
    Quote Originally Posted by mcederna View Post
    so no need to get a 160mm pump?
    No, you can run this 160mm R&D wear ring on your stock pump
    http://www.4-tecperformance.com/inde...ducts_id=2152f

    and then use this 160mm impeller in a pitch of your choosing
    http://www.4-tecperformance.com/inde...oducts_id=1451

    hope that helps!
    Jerry
    will be coming your way if everything gets squared away Jerry. (crossing my fingers)

  7. +1 by:


  8. #7
    I ordered mine from Jerry and did the conversion last week. It is awesome! No cavitation at all. I had the same 13/22R impeller and had massive cavitation. Definitely worth the money.

  9. #8

    Join Date
    May 2015
    Location
    Alabama
    Posts
    107
    Quote Originally Posted by Green Hulk View Post
    Quote Originally Posted by mcederna View Post
    so no need to get a 160mm pump?
    No, you can run this 160mm R&D wear ring on your stock pump
    http://www.4-tecperformance.com/inde...ducts_id=2152f

    and then use this 160mm impeller in a pitch of your choosing
    http://www.4-tecperformance.com/inde...oducts_id=1451

    hope that helps!
    Jerry
    Jerry, just to comfirm that prop states 2013 and older. What's the option for the newer skis? SVHO prop and spacer ?


    Even if we go for the 160mm race pump that still leaves us with a SHO shaft, does the race pump utilise the SVHO shaft ?

  10. #9
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,971
    +1
    2,768
    Quote Originally Posted by sparkyme View Post
    Jerry, just to comfirm that prop states 2013 and older. What's the option for the newer skis? SVHO prop and spacer ?
    Even if we go for the 160mm race pump that still leaves us with a SHO shaft, does the race pump utilise the SVHO shaft ?
    I have several different SVHO impellers in the online store. Of course, I can even have them made in custom pitch sizes. Just specifiy which pitch you want in the comments box when you make the order in the store.

    There are two different Riva race pumps. One for the SVHO skis and one for the SHO & HO skis

    Riva Yamaha 160mm Race Pump for SVHO Skis

    Our 160mm Race Pumps deliver increased acceleration & top speed along with reduced cavitation. Designed for high performance applications that exceed...
    YVS-SV-160/74 $999.95

    Riva Yamaha 160mm Race Pump for SHO & HO Skis

    Our 160mm Race Pumps deliver increased acceleration & top speed along with reduced cavitation. Designed for high performance applications that exceed...
    YSS-SV-160/74R $999.95


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts WANTED: Riva 160mm FZR/SHO liner and Skat 13/17.5 160mm Prop
    By Ski Hacks MG in forum Yamaha Classifieds
    Replies: 2
    Last Post: 06-07-2015, 07:37 PM
  2. FS Yamaha sho stainless prop
    By corkycat in forum Yamaha Classifieds
    Replies: 1
    Last Post: 09-02-2010, 03:51 AM
  3. 160mm prop and liner help
    By hotrod6731 in forum Yamaha PWC Performance (4-stroke)
    Replies: 32
    Last Post: 07-19-2010, 09:51 AM
  4. FS FS: SHO stock prop and Solas 13/22R
    By robk in forum Yamaha Classifieds
    Replies: 0
    Last Post: 07-05-2010, 04:33 PM
  5. 160mm prop gauge
    By Doug78 in forum Yamaha PWC Performance (4-stroke)
    Replies: 1
    Last Post: 06-15-2010, 08:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •