Up and running but not exactly help!!

[rmk82nd]

Hey guys so I just left the ramp where I ran my ski with all the new mods in the ski and having some issues. First off the fuel pump fuse popped the 10amp one so I reinstalled a 15 this time as some have done. Went to start ski again and ran her for a minute. After that I went and looked at my codes an the p0231 cleared that I was having issues last year with blowing fuses. so I started her back up and ran her for a couple minutes when the code came back.

In addition the rrfpr I have is set for 58 static however when running in water it is fluctuating all over from 40-60 and does not level but for more than a couple seconds and starts fluctuating again eventually dropping all the way down and killing ski after a minute or two.

I am running the vtech id1000 9k tune with the cmd/wb2 as a zero map currently since first time out testing.

Could my my rrfpr be bad or is it the pump? I do not have a relay on pump btw.

[jpt7779]

Fuel pump and or connections. I don't think a FPR can blow fuses!

[rmk82nd]

Yeah the rrfpr won't blow the fuse. Ordering new walbro hopefully it will correct rrfpr fluctuating and get her right.

[skidoochris]

order a fuel filter kit too
I bet your old sock will be nasty