Results 1 to 10 of 16
Thread: Confirm idle.
-
05-26-2015, 05:18 PM #1
Confirm idle.
Hi guys, could you guys confirm if this idle is fine.
I know it's normal at 1800rpm but I had an idle problem as it was haunting between 1800-2600rpm but now after fixing an exhaust Leak it seems to be around 1800 +- 50 with the odd drop down to 1600rpm and up to 1900rpm
here is a video of my ski.
Thanks guys
-
05-26-2015, 07:11 PM #2
Both mine are 1700 on the money every single time
-
05-27-2015, 04:04 AM #3
Ok so I take it I have a problem with mine then. Can anyone else confirm that this idle is incorrect please?
Thsnks
-
05-27-2015, 06:06 AM #4
-
05-27-2015, 06:59 AM #5
Mine are 2015's x2 and in the water it's 1700 didn't see if you posted in or out.
-
05-27-2015, 07:38 AM #6
Mine has always been 1800 +-50 in the water unless something is wrong. Out of the water there is no load, and its usually fired cold, so more variation out of water is not uncommon.
-
05-27-2015, 07:40 AM #7
-
05-27-2015, 07:53 AM #8
Can't see your video ... says I have to sign in ...
-
05-27-2015, 10:12 AM #9
-
05-27-2015, 06:30 PM #10
Checked mine today again...both are 1700 consistently warm/hot but 100rpm is nada...
M
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Blocking off TOPS and idle control solenoid
By Green Hulk in forum Sea Doo How To & FAQsReplies: 9Last Post: 01-11-2017, 03:08 PM -
RXP idle-60 mph times?
By watermedic in forum 4-Tec PerformanceReplies: 11Last Post: 08-20-2006, 08:34 PM -
fast idle speeds
By wakeborder556 in forum 4-Tec PerformanceReplies: 11Last Post: 04-16-2006, 11:47 AM -
What vacum are you guys getting at idle?
By CRS in forum 4-Tec PerformanceReplies: 14Last Post: 03-02-2006, 08:25 AM -
Idle adjust
By OZ_RXP in forum 4-Tec PerformanceReplies: 3Last Post: 09-06-2005, 04:19 PM
I'm following this thread closely... Just finished breaking mine in, so...
2022 Ultra 310X problems.. water...