Results 1 to 10 of 11
Thread: ECU Concern
-
05-18-2015, 03:27 PM #1
- Join Date
- Apr 2015
- Posts
- 21
ECU Concern
Hey All,
I ran the 48 8350 35 34 101 tune for my 2013 SEADOO RXP X 260 and its not starting in Sport mode and I can barely break 70 on smooth water. My RPM's are not exceeding 8000. Any Idea as to why this is happening? Below is the list of upgrades I have done.
2013 Sea Doo RXP x260
VIN: YDV17759C313
1 x RIVA Sea-Doo 'GEN-3' Power Cooler Core
1 x Solas 15/19 Impeller
1 x RIVA 08 and Newer Rising Rate Fuel Pressure Regulator set to 58
1 x R & D RXP-X 260 Pro Series 4" Air Filter Kit
1 x R & D Aquavein Intake Grate for RXP-X 260
1 x RIVA Sea-Doo RXP-X/RXT-X 260 Intercooler Tubing Upgrade Kit
-
05-18-2015, 03:32 PM #2
yea id say you are down about 250 or more rpm you sure there is no limiters left on that tune?
-
05-18-2015, 03:40 PM #3
- Join Date
- Apr 2015
- Posts
- 21
-
05-18-2015, 03:40 PM #4
Try a Different Tune. None of the ones I used start in sport mode. Check for boost leak.. aka all clamps and hoses.
-
05-18-2015, 03:44 PM #5
- Join Date
- Apr 2015
- Posts
- 21
How do I pick another tune. I set a pic of what I have for options. Am I missing another option?
-
05-18-2015, 03:51 PM #6
-
05-18-2015, 04:39 PM #7
I agree, check the simple stuff first. Your ski should run 75+ all day with those mods.
-
05-20-2015, 08:04 AM #8
-
05-20-2015, 02:44 PM #9
With those mods you should be right at 8100 rpm and 74 - 75 mph. As long as the prop is really a 15/19. Often times they are off. What do you mean it wont start in sport mode? The skis dont start off in sport mode.
Are you sure you flashed the ski?
Does it feel snappier? You will notice a big difference if you flashed the ski.
-
05-20-2015, 02:52 PM #10
I believe your riding conditions or prop is the factor. 8000 RPM and the speeds your getting are not normal. To get to 74-75 mph, you need to have the RPM's around 8300.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
How To: Install RR ECU after the knock sensor update 04 RXP
By Green Hulk in forum Sea Doo How To & FAQsReplies: 15Last Post: 06-14-2008, 12:13 PM -
IM CONCERNED!
By Rendog in forum Sea Doo Open DiscussionReplies: 6Last Post: 05-31-2005, 11:32 AM -
ECU choices??
By Vern in forum 4-Tec PerformanceReplies: 6Last Post: 05-17-2005, 02:09 PM -
re program stock ecu
By INDY27 in forum 4-Tec PerformanceReplies: 9Last Post: 05-09-2005, 12:48 PM -
Is anyone going to try the new ECU??? I may, My options
By Jrsrxp in forum 4-Tec PerformanceReplies: 8Last Post: 05-05-2005, 09:36 PM
Red your other post about connecting wires for the iBR, I checked the shop...
Seadoo spark stays in reverse