Results 1 to 10 of 36
-
05-17-2015, 05:25 PM #1
2009 Yamaha FX SHO Bad Idel and No Power All of a Sudden
Today I took out my Wave-runner for the first time and it started right away and ran fine for about 20 MINS. After that I noticed when I gave it gas it would bog a bit but still get up there. Then it lost power and stalled. After 5 Mins it would start again but idle HORRIBLY and then shake while idling, didn't sound right at all. If I gave it gas it would bog and sputter and I had to limp it home. I changed out the plugs and the issue is identical. I don't know what the issue is but I fear I blew the motor. The oil is clean but has some white stuff in it. Below is a video of the issue.
I have all the basic boltons, a larger intercooler with HKS BOV, and a C1-11 Wheels. Last I rode it it was perfectly fine and ran like a champ. Today it ran OK, not perfect and then died. It'll idle poorly but that is it.
Any and all advice would be greatly appreciated.
Regards
-
05-17-2015, 05:32 PM #2
- Join Date
- May 2015
- Posts
- 12
- +1
- 1
Can you explain more about the "white stuff" in the oil? Water in the oil can make it look cloudy white. Or are you talking about little white particles?
-
05-17-2015, 05:34 PM #3
Cloudy for sure. I read it is moisture. Not a crazy amount but it is there.
-
05-17-2015, 05:37 PM #4
- Join Date
- May 2015
- Posts
- 12
- +1
- 1
I will leave this to the experts, but my fear would be a blown head gasket.
-
05-17-2015, 05:39 PM #5
OH OK, that isn't bad at all then. I thinking a blown engine. Head gasket? That I can handle.
-
05-17-2015, 06:48 PM #6
- Join Date
- Jul 2005
- Location
- Central North Carolina
- Posts
- 4,089
- +1
- 608
First is to do a compressin test on all 4 cylinders! Tommy Jordan
-
05-17-2015, 06:51 PM #7
mine did a similar thing, it was the sensor under the exhaust manifold, it corrodes and throws a fault code. sounded like a big lumpy cam
maybe take it to a dealer and see if they can check the ecu for any codes.
-
05-17-2015, 06:53 PM #8
I can't even get it to run anymore. I don't see any codes or issues and my oil is milky so I am guessing a blown head gasket. It had power but it was gradually losing until dead.
-
05-17-2015, 07:19 PM #9
- Join Date
- Jan 2008
- Location
- Currituck, North Carolina, United States
- Posts
- 4,995
- +1
- 290
Might have a cracked head.....
-
05-17-2015, 07:23 PM #10
- Join Date
- Jan 2008
- Location
- Currituck, North Carolina, United States
- Posts
- 4,995
- +1
- 290
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Code 113 and Stuck Throttle Body? 2009 Yamaha FX SHO
By EvilEvoIX in forum Yamaha PWC Performance (4-stroke)Replies: 11Last Post: 08-16-2018, 03:00 PM -
FS - Parts WTT 2009 Yamaha Fx SHO Seat and Assembly for FZR Seat and Assembly
By ryan15 in forum Yamaha ClassifiedsReplies: 8Last Post: 10-15-2014, 09:23 AM -
2009 yamaha FX SHO Cruiser WORKSHOP MANUAL
By streeta in forum Yamaha How To & FAQsReplies: 4Last Post: 08-06-2013, 10:33 PM -
Yamaha FX SHO litle vibration and noise at 3000-4000 rpm
By paul18187 in forum Yamaha PWC Performance (4-stroke)Replies: 5Last Post: 08-12-2010, 11:32 PM -
DF11s depth sensor on a 2009 yamaha fx sho
By DrWeaseL in forum Yamaha How To & FAQsReplies: 2Last Post: 07-11-2010, 03:44 PM
I'm following this thread closely... Just finished breaking mine in, so...
2022 Ultra 310X problems.. water...