Results 1 to 7 of 7
  1. #1
    Sharkdiver1125's Avatar
    Join Date
    Apr 2015
    Location
    Chesapeake bay MD
    Posts
    205
    +1
    34

    Question 2012 RXTX not running right please help

    I have a 2012 Rxtx 260. My original issue was a single flywheel bolt sheared and trashed my magneto and stator. After replacing the bolts the stator and magneto the ski is now running extremely rough and stalling out at idle. As far as I know there's no way to put the flywheel in wrong because of the dowel pin.
    And the only codes that show up on the dash Are p0106 (map sensor out of range) I checked the voltage going to the map sensor plug and that seems fine, I also put a map sensor out of my buddies rxtx on my ski and I still have the same problem. I have quadruple checked All the wiring,fuses,grounds, ect. I'm really at a Loss of what to do next


  2. #2
    www.eastcoastpwc.net Scott's Avatar
    Join Date
    Jul 2007
    Location
    NJ
    Posts
    8,290
    +1
    495

    2012 RXTX not running right please help

    Try re-setting the TPS

  3. #3
    Sharkdiver1125's Avatar
    Join Date
    Apr 2015
    Location
    Chesapeake bay MD
    Posts
    205
    +1
    34
    How do you reset the tps

  4. #4
    JT jpt7779's Avatar
    Join Date
    Jul 2008
    Location
    Pittsburg, Texas Lake Bob Sandlin
    Posts
    3,996
    +1
    768
    With a Candoo or dealer BUDS software reset. Candoo systems sold here
    http://www.4-tecperformance.com/inde...ndex&cPath=166

  5. #5
    Sharkdiver1125's Avatar
    Join Date
    Apr 2015
    Location
    Chesapeake bay MD
    Posts
    205
    +1
    34
    The problem ended up being the throttle was seized, I took apart the throttle body, lubed it up and got it moving freely, runs fine now

  6. #6
    JT jpt7779's Avatar
    Join Date
    Jul 2008
    Location
    Pittsburg, Texas Lake Bob Sandlin
    Posts
    3,996
    +1
    768
    Are you running is salt water?

  7. #7
    Boost addict hotbird's Avatar
    Join Date
    Jul 2011
    Location
    Southern WI
    Posts
    5,547
    +1
    689
    I would suggest checking the intercooler for leaks just to be safe.

    Edit just saw your other thread. Nm

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2000 polaris virage 701 not running right NEED HELP!!!PLEASE
    By robbiewolfe in forum Polaris Open Discussion
    Replies: 21
    Last Post: 04-17-2016, 08:50 PM
  2. 2000 polaris virage 701 not running right NEED HELP!!!PLEASE
    By robbiewolfe in forum Open Discussion
    Replies: 0
    Last Post: 04-16-2016, 02:30 PM
  3. 2012 Kawasaki not running right
    By Graz in forum Kawasaki PWC Performance (4-stroke)
    Replies: 6
    Last Post: 07-22-2013, 10:16 AM
  4. sxr 800 not running right please help someone reply with some info
    By skidaddy o in forum Kawasaki How To & FAQs
    Replies: 3
    Last Post: 05-26-2013, 11:24 AM
  5. 250x still not running right, plse help
    By born riding in forum Kawasaki PWC Performance (4-stroke)
    Replies: 10
    Last Post: 05-08-2007, 11:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •